FC Series Float Chargers Operating Characteristics • .C. based voltage and current regulation I designed for sealed (valve-regulated) leadacid batteries Float chargers are designed to provide optimum life for batteries used in standby applications where the current is continuous. The chargers deliver a constant voltage of 2.25 to 2.30 volts per cell, which allows the battery to seek its own current level and maintain itself in a fully charged condition. • seable on domestic and overseas input U voltages from 110VAC – 60 Hz to 240VAC – 50 Hz. See the charger selection guide • loat voltage charging for efficient, care-free F and safe operation • LED indicates charge mode This series is best suited for burglar and fire alarm equipment, emergency lighting, memory protection or UPS systems where the battery serves as backup power to the AC Source. • ightweight wall mounted plug-in design with L screw type output terminals • onnectors to the battery are alligator clips C with insulated sleeves • rotected against accidental reverse polarity P connection • UL and European C.E. approvals Charge Characteristics Charge current (A) Charge voltage (V) Voltage 1.6V per cell Constant current Constant voltage Float charge

Specifications and Charger Selection Guide Model Nominal Voltage Output Voltage Battery Capacity * For help in selecting the correct charger for your application please consult with our Technical Department. Notes Recharge time depends on the depth of the preceding discharge and the output current of the charger. To determine the approximate recharge time of a fully discharged battery, divide the battery’s amp. hrs. by the rated output current of the charger and multiply the resulting number of hours by a factor of 1.75 to compensate for the declining output current during the charge cycle. If...