RPMGS-20
7Pages

Features Switching Regulator • 20A non isolated sixteenth brick • 18 to 75VDC wide input range • 3.3 to 24VDC adjustable output • Standard sixteenth brick wide format • High efficiency up to 98% • Operating temperature derates to 120°C DC/DC Converter Description The RPMGS-20 series is a non-isolated 20A DC/DC converter in a sixteenth brick package. The high efficiency and thermal design of the product means that minimal derating is required, even at high temperatures. The device is exceptionally suited for 24V, 28V, and 48V power rails as a point of load solution in a distributed power architecture. Trimmable output, remote sense, and remote control features as well as undervoltage lockout, overload, over-temperature, and short circuit protections are standard. 20 Amp 16th Brick 3 Open Frame Single Output Selection Guide Part Input Voltage Output Vout Output Efficiency Max. Capacitive Number Range (1) Voltage Adjust Range Current max. typ. Load [VDC] [VDC] [VDC] [A] [%] [µF] RPMGS5.0-20 18-75 5 3.3 - 8 20 91 - 94 15000 RPMGS12-20 18-75 12 8 - 24 20 95 - 97 12000 Model Numbering Notes: Note1: Measured Values are with CIN= 880µF + COUT= 4000µF RPMGS __-20 max. Output Current Sixteenth Brick nom. Output Voltage Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) BASIC CHARACTERISTICS Parameter Internal Input Filter Input Voltage Range Absolute Maximum Input Voltage Undervoltage Lockout (UVLO) Input Current Quiescent Current (no load) VIN= 24VDC No Load Power Consumption Internal Power Dissipation continued on next page www.recom-power.com

Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) Parameter Output Voltage Trimming (2) Minimum Load For nom. VOUT leave Trim pin open Output Load [%] Output Load [%]

Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) OUTPUT VOLTAGE TRIMMING The RPMGS series offers the feature of trimming the output voltage over a range between 3.3V and 8V by using external trim resistors. The values for trim resistors shown in trim tables below are according to standard E96 values; therefore, the specified voltage may slightly vary. +Sense COUT Voutnom = nominal output voltage [VDC] Voutset = trimmed output voltage [VDC] = trim down resistor R3, R4, R5 = internal resistors Calculation: ݑٰݑٰݑٰݑ ٰݑ˰ݑ˰ݑ˰ݑ˰ݑ˰ݑ˰ݑ˰ݑ ˰ݑ˰ݑ˰ݑ˰ݑ...

Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) REGULATIONS Parameter Output Accuracy Line Regulation low line to high line, full load Load Regulation Transient Response PROTECTIONS Parameter Short Circuit Protection (SCP) hiccup mode, auto recovery Over Current Protection (OCP) Short Circuit Input Current Over Temperature Protection (OTP) hiccup mode, auto recovery 20.6A 160°C, auto restart after cool down SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Condition with external components (see filter suggestions...

Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) ENVIRONMENTAL Parameter Operating Temperature Range with forced airflow Operating Humidity Operating Altitude MIL-STD-833G, method 2026 test condition II, letter “B” RPMGS5.0-20 Output Load [%] Output Load [%] Output Load [%] Output Load [%]

Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up unless otherwise stated) DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Dimension (LxWxH) Dimension Drawing (mm) Top View 36.83 ±0.5 Pinning Information Pin # Single 1 +Vin 36.83 ±0.5 2 CTRL/UVLO 3 -Vin 4 -Vout 5 TRIM 6 +SENSE 7 +Vout Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm continued on next page www.recom-power.

Specifications (measured @ Ta= 25°C, nom. Vin, full load and after warm-up±0.06 otherwise stated) unless 2X Ø1.57 27.94 Recommended Footprint Details DC/DC Converter Tolerance: xx.x= ±0.5mm xx.xx= ±0.25mm PACKAGING INFORMATION Parameter Packaging Dimension (LxWxH) Type tray Packaging Quantity Storage Temperature Range Storage Humidity The product information and specifications may be subject to changes even without prior written notice.The product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use...