Slim Modular Power & Signal Contact Connectors • Four power contact options: 55 amps, 38 amps, 12 amps and 3 amps versions plus high density signal lines. • Blind mating, float mount, panel mount and cable connector options with unique locking system. • Ventilation option to offer increased air cooling. Catalog number A-014 rev-NC

Notes: 1 A Low Profile Scorpion part number can be a maximum of 30 characters. If the connector configuration exceeds this number, please consult sales for a special part number for your unique requirement. 2 Consult sales for connector length exceeding 101.00 mm [3.976 inch]. 3 Alignment bar is only available for size 20 and size 22 right angle (90°) contacts. Ordering Information - Code Numbering System Specify complete connector by selecting an option from step 1 through 9 (Consult sales for connectors’ length exceeding 101mm or part numbers using more than 30 characters) STEP 1: BASIC SERIES...

Technical Characteristics Insulators: Contacts: Mounting Brackets: Push-on Fasteners: Float Mount Bushings: Glass-filled polyester, UL 94V-0. Black color (Blue optional). Precision machined copper alloy with gold flash over nickel plate. Other finishes available upon request. Brass with tin plate. Copper alloy with tin plate. Steel with zinc plate. Electrical Characteristics: Contact Current Rating (See Page 5 for Power Contact Details) Standard Conductivity Contacts: Size 12 Contacts: 38 amperes, continuous. 12 amperes, continuous. Size 20 Contacts: Size 22 Contacts: 3 amperes, nominal. High...

Typical LSP Modular Connectors Board to Panel with Blind Mating System Female Panel Mount Connector Typical part number: LSP2YKNRS1F0001 (Contacts ordered separately) Male Right Angle PCB Mount Connector Typical part number: LSP2YKNRS4M0B0A1 Board to Board with Crimp Contacts Pass-through Male Right Angle (90°) PCB Connector Typical part number: LSP2YGN2UN2T4M009A1 Female Straight PCB Connector Typical part number: LSP2YGN2UN2T3F009A1-PAxxx (Crimp contacts ordered separately) Board to Board with Blind Mating System Female Right Angle(90°) PCB Connector Typical part number: LSP2EN3EN3EN3GN2ST4F009A1...

Temperature Rise Curves and Guide Systems, Locking Options Developed with 2 size 20 standard conductivity contacts seated in code S module. Contact sales if additional testings and current ratings are required. Guide Systems and Locking Options See Step 2 of Ordering Information Blind Mating Guide System Specify Code 2 in Step 2 Cable to Cable Locking Latch System Specify Code 3 in Step 2 Male Connector Female Connector Male Connector Female Connector Male Cable to Female Panel/Board Locking Latch System Specify Code 4 in Step 2 Female Cable to Male Panel/Board Locking Latch System Specify Code...

Insulator Dimensions and Venting Features Insulator Dimensions when using Blind Mating System * 2.20 [0.087] Cable/Panel Connector Male Insulator Cable/Panel Connector Female Insulator * Dimension applicable for Size 12 power contact module only. Insulator Dimensions when using Locking Latch System * 2.20 [0.087] Cable Connector Cable Connector Male Insulator Female Insulator Cable/Panel Connector Male Insulator Cable/Panel Connector Female Insulator * Dimension applicable for Size 12 power contact module only. Venting Features Specify Code 9 in Step 8 of Ordering Information Venting feature...

^bP Low Profile Module Options and QB Scorpion Contact Termination Dimensions Module Options See Step 3 of Ordering information Size 12 Power Contact Modules Size 20 Power / Signal Contact Modules Size 22 Signal Contact Modules Blank Modules All modules shown above are male modules. Avaliable in female straight and right angle (90°) PCB mount. Consult sales for availability of other modules. Contact Termination Dimensions See Step 4 of Ordering information Straight PCB Mount Connectors Specify Code 3 or 38 in Step 4 Size 20 contacts Size 22 contacts Code 3 is standard conductive material contact...

Contact Termination Dimensions See Step 4 of Ordering information Right Angle (90°) PCB Mount Connectors Specify Code 4 or 48 in Step 4 Size 12 contacts Code 4 is standard conductive material contact and code 48 is high conductivity material power contact. Press-Fit Straight PCB Mount Connectors Specify Code 93 or 938 in Step 4 Size 12 contacts Code 93 is standard conductive material contact and code 938 is high conductivity material power contact. Male connector shown for reference. Dimensions also apply to female connector. Note: Outline dimensions for Press-Fit Connectors are the same as those...

Accessories for PCB Mount See Step 7 of Ordering Information 90° Through Hole Brackets Specify code B in Step 7 90° Board Lock Brackets Specify code LN in Step 7 Material and Finish: Brass with tin plate. Material and Finish: Brass with tin plate. Push-on Fasteners Specify code N in Step 7 Material and Finish: Copper alloy with tin plate. Ø2.06 [0.081] Straight PCB Mount Connector Right Angle (90°) PCB Mount Connector Male connector shown for reference only. Consult sales for mounting screw information. Accessories for Panel Mount See Step 6 of Ordering Information Easy Release Mounting Clips...

Removable and Non Removable Crimp Contacts (Contacts Ordered Separately) Size 12 Removable Crimp Contacts Part Number (Standard Conductivity Contacts) Part Number (High Conductivity Contacts) Sequential Mate Male Contacts Size 20 Removable Crimp Contacts Part Number (Standard Conductivity Contacts) Sequential Mate Female Contacts Male Contacts Size 22 Non Removable Crimp Contacts Male Removable Contact Size 22 Removable Crimp Contacts Male Contacts Materials and Finishes: Precision machined copper alloy with gold flash over nickel. Consult sales for other contact sizes, materials, finishes, termination...

Recommended Tools for Crimp Contacts R eco m m en d e d Tools f or Crimp Conta c ts Contact Extraction Tool Cycle-Controlled Step Adjustable Hand Crimp Tool Contact Insertion Tool Contact Size Contact Extraction Tool Contact Insertion Tool Hand Crimp Tool 9509-6-1 with 9509-6-2 positioner (*C1210** contacts) 9501-0 with 9502-38-0 positioner (MC1212** contacts) 9501-0 with 9502-37-0 positioner (FC1212** contacts) 9507-0 with 9502-21 positioner (male contacts) 9507-0 with 9502-22 positioner (female contacts) 9507-0 with 9502-12-0 positioner (male contacts) 9507-0 with 9502-13-0 positioner (female...