GROUNDING PLATES DESIGNED FOR AIRCRAFT APPLICATIONS Positronic Industries connectpositronic.com Positronic Industries’ grounding plates were designed especially for aircraft applications where shielded cable must be grounded to the aircraft frame. The ground wires of the shielded cable are piggy-backed out of the cable with ferrules and are crimped to Size 16 female contacts. The female contacts are loaded into standard 14 or 34 contact connector housings. These connectors can then be mated to the grounding plate which is fastened to the aircraft frame. Grounding plates have Size 16 precision-machined male contacts which are swaged and soldered onto the metal plate. Standard Density Rectangular The metal plates (angled and plane) have fixed female jackscrews that accept the rotating jackscrews, which are an integral part of the mating female connector. Long rotating jackscrews extend beyond the edge of the cable adapter of the 14-contact female connector which permits easy coupling to the grounding plate. Other contact variants are available for grounding plate applications. Contact Technical Sales for information on the availability of other grounding plates offered by Positronic Industries. GROUND PLATES GROUNDING PLATES TECHNICAL CHARACTERISTICS MATERIALS AND FINISHES: Contact Retention in Insulator: 20 lbs. (89N) after 10 cycles of contact insertion/extraction. Glass-filled DAP per MIL-M-14, Type SDG-F. Grey or black in color. Grounding Plates: Copper alloy with tin plate. Female Contact Termination: Copper alloy with 0.000010 inch [0.25 microns] gold over nickel plate. Jackscrew System: Stainless steel, passivated. ELECTRICAL CHARACTERISTICS: Strain Reliefs: Steel with zinc plate and chromate seal or aluminum with yellow anodize. Crimp wires, Sizes 20 AWG [0.5 mm ] 2 through 24 AWG [0.25 mm ]. 6-32 UNC threads. Contact Current Rating: Insulation Resistance: Working Voltage: Working Temperature: MECHANICAL CHARACTERISTICS: Removable Female Contacts: Insert contact to rear face of insulator, release from front face of insulator. “Closed Entry” design for highest reliability. DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE.

GROUNDING PLATES DESIGNED FOR AIRCRAFT APPLICATIONS Positronic Industries connectpositronic.com GROUNDING PLATE COMPONENT DESCRIPTION E C1 TYPICAL PART NUMBER: SK2114 B TYPICAL PART NUMBER: SK2113 GROUND PLATES Standard Density Rectangular CONNECTOR COMPONENT DESCRIPTIONS ITEM COMPONENT DESCRIPTIONS Female Contacts, Size 16, Crimp Terminations. Female Connector Insulator. Fixed Jackscrew. Rotating Jackscrew. Strain Relief provides cable support. Grounding Plate. DIMENSIONS ARE IN INCHES [MILLIMETERS]. ALL DIMENSIONS ARE SUBJECT TO CHANGE.

Positronic Industries connectpositronic.com GROUNDING PLATES DESIGNED FOR AIRCRAFT APPLICATIONS Standard Density Rectangular Grounding Plate Ordering Information Grounding plates are offered in five (5) different configurations, as shown below. These grounding plates can be used with the connector strain relief assemblies shown to the right below. The connector strain relief assemblies are provided with an appropriate number of FC120N2 female contacts. The FC120N2 contacts feature a “Closed Entry” design and accomodate wire sizes 20 - 24 AWG (0.5 - 0.25 mm2). Reference the schematics below for...

GROUNDING PLATES DESIGNED FOR AIRCRAFT APPLICATIONS Standard Density Rectangular For this connector strain relief assembly, order part number: GMCT14F0EX00A0-697.0 Positronic Industries connectpositronic.com A plastic cable tie is supplied with this connector. FC120N2 FEMALE CONTACT “CLOSED ENTRY” DESIGN (ENLARGED) The appropriate number of contacts are supplied with the connectors. These crimp termination contacts accomodate wire sizes 20 - 24 AWG (0.5 - 0.25 mm2). Contact Technical Sales for crimp tool ordering information. GROUND PLATES For this connector strain relief assembly, order part...

POSITRONIC INDUSTRIES Positronic Products Power Contact Sizes: 0, 8, 12, 16, 20 and 22 Current Ratings: To 100 amperes Terminations: Crimp, wire solder, straight solder, right angle solder, straight press-fit and right angle press-fit Configurations: Multiple variants in a variety of package sizes Compliance: PICMG 2.11, PICMG 3.0, VITA 41 D-Subminiature Contact Sizes: 8, 20 and 22 Current Ratings: To 40 amperes nominal Terminations: Crimp, wire solder, straight solder, right angle solder and straight press-fit Configurations: Multiple variants in both standard and high densities Qualifications:...

NORTH AMERICAN LOCATIONS UNITED STATES, Springfield, Missouri, Corporate Headquarters Factory Sales and Engineering Offices PUERTO RICO, Ponce Factory Factory Sales and Engineering Offices MEXICO Factory Sales and Engineering Offices CANADA Factory Sales and Engineering Offices ASIA/PACIFIC LOCATIONS SINGAPORE, Asia/Pacific Headquarters Factory Sales and Engineering Offices ASIA, Direct Sales Offices Taiwan Sales Office China Sales Office Korea Sales Office Sales and Engineering Offices Factory Sales and Engineering Offices JAPAN INDIA ASIA/PACIFIC, Technical Agents Technical Agents in Malaysia,...