overhead air conveyor for empty PET/HDPE bottles

Product catalog summary

Introduction
POSIJET is an advanced air conveyor system designed for transporting plastic bottles. It is unique in the market for its double guide system, which provides enhanced protection and stability for bottles, reduces noise, and saves energy.

Main Features

Double Guide System: The system uses four guides to encapsulate the bottle, minimizing marking and turbulence, and enhancing stability at high speeds.
Precisely Directed Airflow: A bi-directional louvre pattern directs up to 85% of airflow around the bottle, reducing contamination and jams while maintaining bottle velocity and verticality.
Reduced Friction: The reverse angle design of neck guides creates an air cushion, reducing friction and power consumption.

Automatic Airflow Control
The system includes an automatic airflow control for different bottle sizes, using pre-set programs and sensors to adjust airflow based on line conditions. This allows for efficient transport of bottles ranging from 0.1L to 5.0L.

Additional Features

Bottle Jam Detection (BJD): An electronic system for detecting jams.
Automatic Bottle Neck Guide System: For handling different bottle neck sizes.
Automatic Cleaning (CIP): Rotary jets for aseptic applications and manual cleaning options.
Fan Airflow Filtration: Available in standard, Mediclean, and Aseptic formats, offering various levels of filtration.

Design Flexibility
POSIJET offers modular construction with options for incline and decline sections, dumpgates, batching units, and more, providing flexibility for any system design.

Conclusion
POSIJET is a leading solution for bottle handling, offering advanced technology and flexibility to meet diverse production line needs.

Catalog excerpts

overhead air conveyor for empty PET/HDPE bottles -1

POSIJET is the only air conveyor where the bottle rings slide between a total of 4 guides, twoeach side of the ring. It is more gentle and protective with bottles; it minimises the noise level and it saves energy. It can reach the most demanding speeds. >

Open the catalog to page 1

overhead air conveyor for empty PET/HDPE bottles -2

The double guide profile encapsulates the bottle above and below the neck ringpreventing the marking of the bottle shoulders and reducing potential air pocket turbulence, creating more bottle stability at very high line speeds. POSIJET > The unique bi-directional louvre pattern concentrates up to 85% of the air around the neck ring and the body of the bottle. This precisely directed airflow reduces levels of contamination, increases bottle velocity, greatly reduces bottle jams and maintains the bottle in a more vertical position at speeds higher than 1,200 bpm. OTHERS OTHERS POSIJET > With the...

Open the catalog to page 2

overhead air conveyor for empty PET/HDPE bottles -3

For single or multi-size bottle lines POSIJETprovides an automaticairflow control system for each bottle.These are pre-set programmes inserted into the main PLC which controls the variable frequency drives via information provided by photoelectric sensors on the system. Each fan section (10m) has two sensors which monitor the line conditions, creating a three stage airflow system, minimum pressure for single bottles (no sensors detecting), medium pressure for batches or partial accumulation (first sensor detecting) and maximum pressure for full accumulation (both sensors detecting).Therefore...

Open the catalog to page 3