*mydirectindustry

Catalogs
Portescap S.A.
specifications_b0810a1

specifications_b0810a1

Product catalog summary

Overview: This document provides technical specifications for the B0810A1 Multi-tool Surgical Motor, a brushless slotted motor with a diameter of 0.8 inches. It includes detailed electrical and mechanical data, as well as general information about the motor's construction and operational capabilities.

Specifications:

Dimensions: The motor has specific dimensions with tolerances, including a diameter of 0.801 inches and a length of 51.71 mm.
Connector: AMP part number 3-640430-8 with cover 643067-8 is used, with a suggested mating connector from the AMP MTA-156 series.
Motor and Sensor Leads: Both are 6.0 inches long, with motor leads being 24 AWG stranded and sensor leads 26 AWG stranded.

Electrical Data:

Nominal Voltage: 9 Volt
No Load Speed: 26,700 rpm
Typical No Load Current: 705 mA
Max Continuous Mechanical Power: 12 W
Max Continuous Current: 7.75 A
Max Continuous Torque: 21.4 mNm
Peak Torque: 198 mNm
Line to Line Resistance: 0.146 ohms
Inductance Phase to Phase: 0.027 mH

General Data:

Ambient Working Temperature Range: -30 to +135 °C
Maximum Winding Temperature: 155 °C
Radial Static Force without Shaft Support: 60 N
Axial Static Force without Shaft Support: 15.8 N
Thermal Resistance: 9.8 °C/W
Weight: 110 g
Autoclave Cycles: 1000+ cycles

Wire Description: The motor includes various colored wires for different phases and sensors, including blue for Phase A, brown for Phase B, and violet for Phase C.

Graphical Data: The document includes graphs showing the relationship between speed, power supply voltage, and torque, indicating maximum continuous operation at 25°C and other performance metrics.

Catalog excerpts

Surgical Motor Solutions B0810A1 Multi-tool Surgical Motor Ø 0.8 inch • Brushless Slotted Motor Leads: 6.0" [152 mm] long, 24 AWG stranded. Sensor Leads: 6.0" [152 mm] long, 26 AWG stranded. Connector: AMP part number 3-640430-8 with cover 643067-8. Suggested mating connector: AMP MTA-156 series Dimensions in inches [mm] Electrical Data 1 Nominal Voltage 2 Optimization Direction 3 No Load Speed 4 Typical No Load Current 5 Max. Continuous Mechanical Power (@25°C) 6 Max. Continuous Current 7 Max. Continuous Torque 8 Back EMF Constant 9 Torque Constant 10 Motor Regulation 11 Peak Torque 12 Motor Constant 13 Line to Line Resistance 14 Inductance Phase to Phase 15 Mechanical Time Constant 16 Electrical Time Constant Unit Volt rpm mA W A mNm (oz-in) V/1000 rpm mNm/A (oz-in/A) 103/Nms mNm (oz-in) mNm/W½ (oz-in/W½) ohms mH ms ms Ratio °C (°F) °C (°F) N (lbs) N (lbs) °C/W s g (oz) kg-cm2 10-4 (oz-in-sec2 10-6) Electrical ° Cycles Gearhead Ratio Ambient Working Temperature Range Maximum Winding Temperature Radial Static Force w/o Shaft Support (max) Axial Static Force w/o Shaft Support (max) Thermal Resistance Thermal Time Constant Weight Rotor Inertia Hall Sensor Electrical Phasing* Autoclave Cycles *Also available without Hall sensors Short time Power supply voltage (V) V012024 • © 2024 Portescap. Specifications subje

Open the catalog to page 1

All Portescap S.A. catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list