TEXTILE EXPANSION COMPENSATORS Since expansion compensators are fundamental elements for the proper functioning of your processes, we make sure that the ones we offer you: • Absorb expansion movements between flanges (due to their great flexibility) • Ensure a good seal against air, gas, smoke, etc. • Insulate the installation to limit thermal losses and protect personnel Optimal constructions for MAXIMUM gain…. Depending on the elements of your application, our design office will propose the most suitable design, in order to obtain an optimal cost of use. Closed interlocking compensator • Possibility of including screw fixing collars • Pre-packaged Insulated interlocking compensator • Possibility of including screw fixing collars • Reinforced edges for protection at the bindings • Pre-packaged Open compensator, making it easier to install if there is a deflector. • Glue cartridge included to provide you with a complete kit • Cutting on site possible => adaptation to different installations • Reinforced edges for protection at the bindings Compensator with pre-drilled flanged edges • Insulated flanged edges to optimise the life of the compensator • Pre-packaged Compensator for corrosive or abrasive fluids • Abrasive fluids : addition of a SS cloth on the inside • Corrosive fluids : insertion of a chemical barrier (Viton, PTFE…) • Pre-packaged High-performance compensator integrating mat + band • (1) Sealing trip : Extra length and glue cartridge included => waterproofing guaranteed even at the junction • (2) Soft insulation mat : If abrasive elements are present, add a metallic protection. Depending on the dimensions, supply possible in several parts with strap/buckle junction (easy handling, cohesion between the different parts) Here we have presented some typical constructions of the compensator range, it being understood that we will study all your requests on the basis of the criteria below: • Working temperatures (100°C to 1300°C) • Fluid (air, air + dust, fumes, charged air (specify the compounds)) • Pressure (maxi admissible 200 mbar) • Dimensions (unlimited, the largest compensators can be made in several parts) • The different expansion movements: axial compression, radial displacement or torsion • The designs of your installations: Interlocking, Flanged edges, mixed or even with the addition of insulating blankets