MANUAL RESET THERMAL CUT-OUTS These devices require manually activated reset. They feature snap action, Quick Make/Quick Break action. An electrically isolated bimetal disc is used to either open or close the circuit current. MANUAL RESET THERMAL CUT-OUTS Snap Action device with Quick Make/Quick Break action. Function An electrically isolated bimetal disc is used to either open or close the circuit current. Manually activated reset required. Contact Resistance Dielectric Strength Terminal to Cap Break-over Voltage, Open Contacts Tracking Resistance of Base Material Available Calibration Ranges Standard Differential Min. Rate of Temp. Rise Ambient Temperature Limits Ingress Protection Rating 50 m A (others on request) < 25 m Q other values or gold plated contacts on request -5° up to 185° C others upon request -5° up to 200° C others upon request up to 40° C below the min. switching temperature limit lowest limit 30° C. Other values on request We come through when the heat is on® 7700 Freedom five. NW, P.O. Box 2170, North Canton, Ohio 44720, U.S.A. Phone: (330) 499-2727 • 1-888-GO4-PEPI • FAX (330) 499-1853 • e-mail: [email protected] • www.pepiusa.com