S100A Single Phase Universal Protection Relay Test Set PONOVO POWER CO., LTD. www.ponovo.net

S100A Single Phase Universal Protection Relay Test Set S100A is a type of relay tester controlled by SCM. It is portable and easy to use. The tester can apply to the tests not only on operating value and operating time of AC/DC relays, but also on complex voltage blocking directional over current, zero sequence over current, low-frequency load shedding and other protection functions of low voltage line micro-processor based protection relay and whole group transmission of high voltage line micro-processor based protection relay, and on starting value, quickbreak value, the 2nd harmonic blocking...

S100A Single Phase Universal Protection Relay Test Set Panels  Top panel Current output: 1x100Aac, 1x10Adc Current output: 1x200mA AC/DC Binary output Voltage output: 3x150Vac, 1x300V (through Uab) Auxiliary DC output: OFF/ON (24V/110V220V) Binary input: Trip, Close Ground port  Front panel Short-cut key for test module Auto reclose (Instant Fault, Constant Fault, Fault Time, Triger), Active Value + Trip Time, Low frequency (End Frequency, Df/Dt, Operation Frequency), Others (Harmonic test, Current Test, Voltage Test) LED indication-Overheat, V Overload, I Distortion, High power Parameter selection...

S100A Single Phase Universal Protection Relay Test Set  Rear panel Ventilation Power switch Main power supply connector S100A Local Relay Test Set Software Colored LCD with local control system makes S100A portable and easy to use. There are Actual Value and Trip Time test modules, Auto reclosing test module, Low frequency test module and Harmonic test, Current test and Voltage test modules.  Act Value Test  Can output 3-phase AC voltages and 1-phase AC current or 1 channel DC voltage and 1 channel DC current.  Can manually control the AC amplitude, phase angle, frequency and DC amplitude...

S100A Single Phase Universal Protection Relay Test Set  Trip Time Test  The AC/DC trip time can be tested here.  Auto Reclosing Test  Including instant fault and constant fault states.  Under Frequency (df/dt) Test  Harmonic Blocking Test  The trip value, trip time, df/dt, voltage blocking, current blocking can be tested.  The 2nd, 3rd and 5th harmonic blocking test on differential relay can be done here.  Current Test  The pick-up, drop-off and factor wil

S100A Single Phase Universal Protection Relay Test Set  Voltage Test  The pick-up, drop-off and factor of voltage will be tested here. Specifications Range Phase angle Range Accuracy 3×0-150V Source 1: 0-100A Source 2: 0-200mA DC voltage 0-300V (through Uab) DC current Source 1: 0-10A Source 2: 0-200mA Auxiliary DC 24V/110V/220V Response time for V and I <100us AC current Range 0-200mA (source 2) Accuracy ±0.4mA DC voltage Range Accuracy Output power Phase angle accuracy Frequency accuracy Binary output Number Type Dry contact Break capacity AC Vmax: 250V (AC) / Imax: 0.5A Break capacity DC...

Professional Solution Provider For The Power World Since 2001, Ponovo Power has been focusing on providing professional solutions to over 5000 clients in the fields of intelligent testing and power quality control in China and aboard