PAV800 Four‐Quadrant Power Amplifier PAV800 Four‐Quadrant Power Amplifier is equipped with feature of high voltage (AC 240V), high precision, high power, supporting source mode and sink mode etc. It can meet different application on PHIL application user. PAV800 co‐work with different simulators as to build a PHIL (Power Hardware in Loop) simulation. It can easily, fast and efficiently build a variety of simulating and testing application scenarios, including power systems, new energy, electric vehicles and charging facilities, Micro‐grid, distributed energy, rail transit, industrial robots, and aviation etc. PAV800 is the three‐phase system including 3‐phase power amplifier units and 1 power supply unit. When 3‐phase 220V is output, the maximum load current can be up to 4A/phase, 880VA power output, which can meet the user's power supply for 220V.

PAV800 Four‐Quadrant Power Amplifier Specifications Voltage amplifier – AC output Voltage output Control Accuracy Resolution Max. output power Gain Signal range Voltage rising/dropping time THD% Frequency range Amplitude‐frequency characteristics Output time Max sink power Protection 3×240V AC Independent control of amplitude, frequency and phase angle ±10mV(0.2V‐10V); ±0.1%(10V‐240V) 1mV(0.2V‐10V); 10mV(10V‐240V) 880VA (single phase output 220V) 2400VA (three phase output 220V at the same time, angle difference 120 degree) 40V/V 0‐±6V RMS (±8.5Vpek) <20us ≤0.5%(10V‐240V) 10Hz‐1KHz ≤±0.1%~±0.5%(10Hz‐1KHz)...