PA460Bi-H Digital Real Time Simulation Power Amplifier Datasheet_EN_2026 V2

1 / 1 PageView full catalog

PA460Bi-H Digital Real Time Simulation Power Amplifier Datasheet_EN_2026 V2

Product catalog summary

Voltage Amplifier Specifications

Output Voltage: 6×300V (Line-Neutral), 1×600V (Line-Line)
Maximum Output Power: >45VA at 6×300V, >90VA at 3×300V, >170VA at 1×600V
Input Signal (Standard): 0-6Vrms (±8.5V peak), Gain: 50 V/V
Input Signal (Optional): 0-10Vrms (±14.14V peak), Gain: 30 V/V
Differential Input Impedance: 20 kΩ
Voltage Accuracy: <0.2% (5V-300V), Typical <0.1%
Harmonic Distortion Ratio: ≤0.1%
Linearity: ≤0.2%
Frequency Range: DC to 3 kHz ±1 dB
Step Response: <80 μs
Input and Output Delay: <80 μs
Phase Accuracy: 0.2°

Current Amplifier Specifications

Maximum Current Output: 6×32A RMS (L-N), 3×64A RMS (2L-N), 1×180A RMS (6L-N)
Maximum Output Power: Typical and guaranteed values vary by configuration, e.g., 6×450VA typical at 32A, 1×1200VA typical at 180A
Input Signal (Standard): 0-7.11Vrms (±10.05V peak), Gain: 4.5 A/V
Input Signal (Optional): 0-10.66Vrms (±15.07V peak), Gain: 3 A/V
Differential Input Impedance: 20 kΩ
Current Accuracy: 0.2% (0.5-32A), Typical <0.1%
Phase Accuracy: 0.2°
Harmonic Distortion Ratio: ≤0.2%
Frequency Range: DC to 5 kHz ±1 dB
Step Response: <20 μs
Input/Output Delay: <20 μs
Linearity: ≤0.2%

Environmental and Safety Conditions

Operating Temperature: -5°C to 50°C
Storage Temperature: -25°C to +70°C
Humidity: 20% RH to 85% RH
Pressure: 86 kPa to 106 kPa
EMC Standards: IEC-61000-3-2/3 (Emission), IEC-61000-4-2/3/4/5/6/11 (Immunity)
Safety Standards: IEC/EN 61010-1:2010, UL 61010-1:2012, CAN/CSA-C22.2 No. 61010-1-12
Surrounding Conditions: No dust, vibration, or severe electromagnetic interference

Power Supply and Physical Characteristics

Power Supply: AC 110V/120V/220V/240V, 50/60 Hz
Weight: 27 kg
Chassis Dimensions: 4U 19 inches rack, 482 mm × 172 mm × 580 mm

PA460Bi-H Digital Real Time Simulation Power Amplifier Specifications

Output Voltage Range: 0-120V
Output Current Range: 0-5 A RMS (15 A peak)
Output Power: 0.0001 VA to 500 VA (1500 VA peak)
Turn Ratio Range: 1 to 10,000
Ratio Measurement Accuracy: Typical 0.02%, Guaranteed 0.05%
Test Points: Automatic selection of all points per standard requirements
Phase Measurement Accuracy: Typical 1 min, Guaranteed 2 min; Resolution 0.01 min
Current Measurement Range: 0-15 A (auto-ranging), Accuracy ±0.02% typical, ±0.05% guaranteed
Voltage Measurement Range: 0-120 V (auto-ranging), Accuracy ±0.02% typical, ±0.05% guaranteed
Polarity and Winding Polarity Test: Supported (phase difference ±45°)
EMC Compliance: EN/IEC 61326-1
Safety Compliance: EN/IEC 61010-1/1-12/2-030, EN/IEC 60255-25/27, FCC Part 15 Sub B
Other Standards: ECS-001:2006 LVD EU

Summary of Key Features and Best Practices

The voltage and current amplifiers provide high accuracy, low distortion, and fast response suitable for precise power simulation and testing.
Environmental and EMC standards ensure reliable operation in controlled conditions free from dust, vibration, and strong electromagnetic interference.
Automatic test point selection and comprehensive measurement capabilities facilitate compliance with industry standards.
Safety certifications confirm adherence to international electrical safety requirements.
Users should ensure operating conditions remain within specified temperature, humidity, and pressure ranges for optimal performance.

Catalog excerpts

PA460Bi-H Digital Real Time Simulation Power Amplifier Datasheet_EN_2026 V2-1

PA460Bi-H Digital Real Time Simulation Power Amplifier Front Panel Rear Panel Specifications Voltage amplifier Current amplifier Voltage output 6×300V (L-N) Max. current output Output voltage range 0-120V 1×600V (L-L) Output current range 0-5Arms Max. output power >45VA, at 6x300V (15A peak)at 3×300V >90VA, Max. output power Output voltage range Output 0-120V power >170VA, at 1×600V Output range 0.0001VA~500VA 0-5Arms (1500VA peak) Input signalcurrent (standard) 0-6Vrms (±8.5Vpek) (15A peak) Gain (standard) Turn 50V/V ratio range 1-10000 Output power Input signal (optional) 0-10Vrms (±14.14Vpek) 30000:1 or Ratio measurement 0.0001VA~500VA (1500VA peak) Gain (optional) 30V/V 45000:5 Input Signal (standard) Turn ratioinput range 1-10000 Differential impedance 20kΩ Gain (standard) Ratio accuracy measurement 30000:1 or Typ. 0.05% Gur. Voltage <0.2% (5V-300V) accuracy:0.02% Input signal (optional) 45000:5 Test Points selected Automatic Voltage typical accuracy <0.1% Gain (optional) test of all Harmonic distortion ratio ≤0.1% Differential input impedance accuracy:0.02% Typ. 0.05% Gur. points Linearity ≤0.2% Current accuracy Test Points selected Automatic according to Frequency range DC-3kHz±1dB Current typical accuracy test of all standard Step response < 80μs Phase accuracy points requirement Input and output delay < 80μs Harmonic distortion ratio according to Phase measurement accuracy: Frequency range Phase accuracy 0.2° standard 1min Typ. 2min Gur. Step response requirement Input/output delay Phase measurement accuracy: Environmental conditions resolution:0.01min Linearity 1min Typ. 2min Gur. Current Operating temperature -5℃~50℃ measurement range: 0-15 Storage temperature -25-+70°C A (auto ranging) Power supply resolution:0.01min accuracy: Related humidity 20%RH~85%RH Current measurement ±0 range: 0-15±0.05% Gur. .02%Typ Pressure 86 kPa~106kPa Weight A (auto ranging) Voltage measurement range: 0-Chassis/ Dimension(W×H×D) EMC (Emission) IEC-61000-3-2/3 accuracy: 120V (auto ranging) EMC (Immunity) IEC-61000-4-2/3/4/5/6/11 ±0 .02%Typ ±0.05% Gur. accuracy: Safety IEC/EN 61010-1:2010 UL 61010-1:2012 Voltage measurement ±0 .02%Typ range: 0-±0.05% Gur. CAN/CSA-C22.2 No. 61010-1-12 120V (autoconditions ranging) Polarity Yes Surrounding No dust, vibration and severe accuracy: Winding Polarity interference Test Yes (Phase electromagnetic accuracy: 50/60Hz 27kg ±0 .02%Typ ±0.05% Gur. 4U 19 inches/ Voltage measurement range: 0482mm×172mm×580mm 120V (auto ranging) accuracy: ±0 .02%Typ ±0.05% Gur. Polarity Yes Winding Polarity Test Yes (Phase between±45°) EMC(E&I) EN/IEC 61326-1 Safety EN/IEC 61010-1/112/2-030 EN/IEC 60255-25/27 FCC Part 15:Sub B Others ECS-001:2006LVD EU Technical specificat Current measurement A (auto ranging) AC 110V/120V/220V/240V, ±0 .02%Typ ±0.05% Gur. between±45°) Polarity Yes EMC(E&I) EN/IEC 61326-1 PONOVO POWER CO., LTD. Winding Polarity Test Safety Yes (Phase EN/IEC 61010-1/1No.139 Jinghai Third Road, BDA, Beijing, China. 100176 between±45°) 12/2-030 EN/IEC 60255-25/27 Tel : +86 (10) 59089666 EMC(E&I) EN/IEC 61326-1 FCC Part 15:Sub B Fax: +86 (10) 59089999 Safety EN/IEC 61010-1/1- ECS-001:2006LVD EU Others www.ponovo.net 12/2-030 EN/IEC 60255-25/27 [email protected] FCC Part 15:Sub B [email protected] Others ECS-001:2006LVD TechnicalEU 6×32A RMS(L-N) Output voltage range 0-120V 3×64A RMS(2L-N) 1×180A OutputRMS(6L-N) current range 0-5Arms 6×450VA typ. at 32A (15A peak) 6×400VA Output guar. at 32A power 3×800VA typ. at 64A (1500VA peak) 0.0001VA~500VA 3×700VA guar. at 64A Turn ratio range 1-10000 1×1200VA typ. at 180A Ratio measurement 30000:1 or 1×1000VA guar. at 180A 45000:5 0-7.11Vrms (±10.05Vpek) 4.5A/V accuracy:0.02% Typ. 0.05% Gur. 0-10.66Vrms (±15.07Vpek) Test Points selected Automatic 3A/V test of all 20kΩ points 0.2% (0.5-32A) according to <0.1% standard 0.2° requirement ≤0.2% Phase measurement accuracy: DC-5kHz±1dB 1mi

Open the catalog to page 1