PA460Bi Digital Real Time Simulation Power Amplifier Datasheet_EN_2026 V2

1 / 1 PageView full catalog

PA460Bi Digital Real Time Simulation Power Amplifier Datasheet_EN_2026 V2

Product catalog summary

Voltage Amplifier Specifications

Output Voltage: 6×120V (Line to Neutral), 1×240V (Line to Line)
Maximum Output Power: >60VA at 120V, >120VA at 240V
Input Signal (Standard): 0-6Vrms (±8.5V peak), Gain: 20 V/V
Input Signal (Optional): 0-10Vrms (±14.14V peak), Gain: 12 V/V
Differential Input Impedance: 20 kΩ
Voltage Accuracy: <0.1% (5V-120V), Typical <0.05%
Harmonic Distortion Ratio: ≤0.1%
Linearity: ≤0.1%
Frequency Range: DC to 5 kHz ±1 dB
Step Response: <20 μs
Input and Output Delay: <20 μs
Phase Accuracy: 0.2°

Current Amplifier Specifications

Maximum Current Output: 6×32A RMS (L-N), 3×64A RMS (2L-N), 1×180A RMS (6L-N)
Maximum Output Power: Typical and guaranteed values vary by current level, e.g., 6×450VA typical at 32A, 1×1200VA typical at 180A
Input Signal (Standard): 0-7.11Vrms (±10.05V peak), Gain: 4.5 A/V
Input Signal (Optional): 0-10.66Vrms (±15.07V peak), Gain: 3 A/V
Differential Input Impedance: 20 kΩ
Current Accuracy: 0.2% (0.5-32A), Typical <0.1%
Phase Accuracy: 0.2°
Harmonic Distortion Ratio: ≤0.2%
Frequency Range: DC to 5 kHz ±1 dB
Step Response: <20 μs
Input/Output Delay: <20 μs
Linearity: ≤0.2%

Environmental and Safety Conditions

Operating Temperature: -5°C to 50°C
Storage Temperature: -25°C to +70°C
Humidity: 20% RH to 85% RH
Pressure: 86 kPa to 106 kPa
EMC Compliance: IEC-61000-3-2/3 (Emission), IEC-61000-4-2/3/4/5/6/11 (Immunity)
Safety Standards: IEC/EN 61010-1:2010; UL 61010-1:2012; CAN/CSA-C22.2 No. 61010-1-12
Surrounding Conditions: No dust, vibration, or severe electromagnetic interference

Power Supply and Physical Characteristics

Power Supply: AC 110V/120V/220V/240V, 50/60 Hz
Weight: 27 kg
Chassis Dimensions: 4U 19 inches rack, 482 mm × 172 mm × 580 mm

PA460Bi Digital Real Time Simulation Power Amplifier Features

Output Voltage Range: 0-120V
Output Current Range: 0-5 A RMS (15 A peak)
Output Power: 0.0001 VA to 500 VA (1500 VA peak)
Turn Ratio Range: 1 to 10,000
Ratio Measurement Accuracy: Typical 0.02%, Guaranteed 0.05%
Automatic Test Points Selection: Tests all points per standard requirements
Phase Measurement Accuracy: Typical 1 minute, Guaranteed 2 minutes; Resolution 0.01 minute
Current Measurement Range: 0-15 A (auto-ranging), Accuracy ±0.02% typical, ±0.05% guaranteed
Voltage Measurement Range: 0-120V (auto-ranging), Accuracy ±0.02% typical, ±0.05% guaranteed
Polarity and Winding Polarity Test: Supported (phase between ±45°)
EMC Compliance: EN/IEC 61326-1
Safety Standards: EN/IEC 61010-1/1-12/2-030, EN/IEC 60255-25/27, FCC Part 15 Subpart B
Additional Compliance: ECS-001:2006 LVD EU

Summary of Key Performance Parameters

High accuracy voltage and current amplification with low distortion and fast response times
Wide frequency range up to 5 kHz with minimal phase error
Robust environmental tolerance and compliance with international EMC and safety standards
Versatile power supply compatibility and compact rack-mount design
Advanced digital real-time simulation capabilities with precise measurement and automatic testing features

Manufacturer Information

PONOVO POWER CO., LTD.
No.139 Jinghai Third Road, BDA, Beijing, China 100176
Tel: +86 (10) 59089666
Fax: +86 (10) 59089999
Website: www.ponovo.net
Email: [email protected], [email protected]

Catalog excerpts

PA460Bi Digital Real Time Simulation Power Amplifier Datasheet_EN_2026 V2-1

PA460Bi Digital Real Time Simulation Power Amplifier Front Panel Rear Panel Technical Data Voltage amplifier Current amplifier Voltage output 6×120V (L-N) Output voltage 0-120V 1×240V (L-L) range Max. output power >60VA (120V output) Output current range 0-5Arms (15A>120VA peak) (240V output) Output range 0-120V(±8.5Vpek) Input signalvoltage (standard) 0-6Vrms Output power Output current range 0.0001VA~500VA 0-5Arms (1500VA peak) Gain(standard) 20V/V (15Asignal peak) Input (optional) 0-10Vrms (±14.14Vpek) 1-10000 Turn ratio range Output power Gain(optional) 12V/V Ratio measurement 30000:1 or 0.0001VA~500VA (1500VA peak) Differential input impedance 20kΩ 45000:5 Voltage Turn ratio accuracy range <0.1%(5V-120V) 1-10000 Ratio typical measurement 30000:1 or Typ. 0.05% Gur. Voltage accuracy accuracy:0.02% <0.05% 45000:5distortion ratio Test≤0.1% Harmonic Points selected Automatic Linearity ≤0.1% test of all accuracy:0.02% Gur. Frequency range Typ. 0.05%DC-5kHz±1dB points Test Points selected Automatic according to Step response < 20μs test of all standard Input and output delay < 20μs points requirement Phase accuracy 0.2° according to Phase measurement standard 1min Typ. 2min Gur. Environmental conditions requirement Operating temperature -5℃~50℃ Phase measurement accuracy: resolution:0.01min 1min Typ. 2min Gur. Current Storage temperature -25-+70°C measurement Current measurement range: 0-15 AC 110V/120V/220V/240V, A (auto ranging) 50/60Hz accuracy: Weight 27kg ±0.05% Gur. ±0 .02%Typ Chassis/ Dimension(W×H×D) 4U 19 inches/ Voltage measurement range: 0482mm×172mm×580mm 120V (auto ranging) accuracy: ±0 .02%Typ ±0.05% Gur. Polarity Yes Winding Polarity Test Yes (Phase between±45°) EMC(E&I) EN/IEC 61326-1 Safety EN/IEC 61010-1/112/2-030 EN/IEC 60255-25/27 FCC Part 15:Sub B Power supply accuracy: Winding Polarity Test Yes (Phase ±0 .02%Typ ±0.05% Gur. PONOVO POWER CO., LTD. between±45°) Polarity Yes BDA, Beijing, China. 100176 No.139 Jinghai Third Road, EMC(E&I) EN/IEC 61326-1 Winding Polarity Test YesFax: (Phase Tel: +86 (10) 59089666 +86 (10) EN/IEC 59089999 Safety 61010-1/1between±45°) www.ponovo.net 12/2-030 EN/IEC 60255-25/27 EMC(E&I) EN/IEC 61326-1 [email protected] [email protected] FCC Part 15:Sub B Safety EN/IEC 61010-1/1- Gain(standard) 4.5A/V Typ. 0.05% Gur. Input signal (optional) accuracy:0.02% 0-10.66Vrms (±15.07Vpek) Test Points selected Automatic Gain(optional) 3A/V test of all Differential input impedance 20kΩ points Current accuracy 0.2%(0.5-32A) according to Current typical accuracy <0.1% standard Phase accuracy 0.2° requirement Harmonic distortion ratio ≤0.2% Phase measurement accuracy: Frequency range DC-5kHz±1dB 1min Typ.< 2min Step response 20μs Gur. Input/output delay < 20μs Linearity ≤0.2% resolution:0.01min Related humidity 20%RH~85%RH A (auto ranging) resolution:0.01min Pressure 86 kPa~106kPa accuracy: Current measurement ±0IEC-61000-3-2/3 range: 0-15±0.05% Gur. EMC (Emission) .02%Typ A (auto ranging) EMC (Immunity) IEC-61000-4-2/3/4/5/6/11 Voltage measurement range: 0accuracy: 120V ranging) Safety IEC/EN 61010-1:2010; UL(auto 61010-1:2012; ±0 .02%Typ ±0.05% CAN/CSA-C22.2 No.Gur. 61010-1-12 accuracy: Voltage measurement range: 0-±0.05% Surrounding conditions No±0 dust, vibration and severeGur. .02%Typ 120V (auto ranging) electromagnetic interference Yes Polarity 3×64A RMS(2L-N) Output voltage range 0-120V 1×180A RMS(6L-N) Output current range 0-5Arms Max. output power 6×450VA typ. at 32A (15A peak) 6×400VA guar. at 32A Output power 3×800VA typ. at 64A 0.0001VA~500VA (1500VA peak) 3×700VA guar. at 64A Turn ratio1×1200VA range typ. at 180A 1-10000 Ratio measurement 30000:1 or 1×1000VA guar. at 180A

Open the catalog to page 1