- Catalogs
- Pompes Japy
- Single diesel set with frame: PA110 - PA111
Single diesel set with frame: PA110 - PA111
Single diesel set with frame: PA110 - PA111
- Electric Pump Characteristics: Maximum inlet height of 6 m, maximum flow rate of 2.1 m³/h, maximum pressure of 2 bars (1.5 bars with bypass).
- Electric Pump Components: Body pump made of cast iron, turbine made of brass.
- Motor Characteristics: PA110/PA111 have IP44 protection and operate at 50 Hz, while PA659/PA662 have IP55 protection and can operate at 50/60 Hz.
- Manual Pump Components: Body pump and cover made of cast iron, internal mechanism made of zamak, axis of pump and fastenings made of steel.
- The manual pump serves as a priming pump for the diesel circuit and as a backup in case of electrical failure.
- Electric pumps maintain their characteristics even when the manual pump is used, which causes a pressure drop equivalent to a one-way valve.
- PA110 and PA111 models have a power of 0.37 kW, rotation speed of 2800 rpm, and weight of 17.9 kg. PA110 operates at 230 volts with a current of 2.6 amperes, while PA111 operates at 400 volts with a current of 1.5 amperes.
- Flow rates for single-phase models (JEV10INDUS, EZ1RS) and three-phase models (JEV11, EZ1RS) are 2.1 m³/h and 1.3 m³/h respectively.
- PA659 and PA662 models have different rotation speeds and currents depending on the frequency (50 Hz or 60 Hz).
- These kits are used in diesel pumping applications, combining manual and electric pumps for reliability and efficiency.
Catalog excerpts
PA110 / PA659 230 Volt single-phase motor PA111 / PA662 400 Volt three-phase motor APPLICATION SECTOR : These diesel pumping kits consist of a manual pump and an electric pump. The manual pump has a dual function : it is used as a priming pump for the diesel circuit and a backup pump in the event of an electrical fault. Note : the electric pump retains its characteristics, the manual pump generating a pressure drop equivalent to a one-way valve. ELECTRIC PUMP CHARACTERISTICS : Maximum inlet height : 6 m Max flow rate : 2,1 m³/h Maximum pressure : 2 bars, and 1,5 bars with bypass ELECTRIC PUMP COMPONENTS : Body pump : cast iron Turbine : brass MOTOR CHARACTERISTICS : Built-in bypass on single-phase motor and JEV11/661 PA110 / PA111 : IP44 protection - frequency 50 Hz PA659 / PA662 : IP55 protection - frequency 50 / 60 Hz MANUAL PUMP COMPONENTS : Body pump and cover : cast iron Internal mechanism : zamak Axis of pump and fastenings : steel REFERENCE ROTATION SPEED FLOW RATE VOLTAGE CURRENT ROTATION INLET in volt in ampere SPEED OUTLET
Open the catalog to page 1All Pompes Japy catalogs and technical brochures
Catalogue 2022100 Pages
catalogue 2021100 Pages
RETRO2 Pages
K33H1 Page
DC vane pumps: FC3 - FC41 Page
catalogue100 Pages
Mechanical meter for oi1 Page
Meter, flow meter : K241 Page
