> SPECIAL DISTRIBUTION NOZZLE T0PW1 PPV filling nozzle made of polypropylene - Viton Seals: Viton Interior: Stainless steel TECHNICAL CHARACTERISTICS : Working pressure : 3 bars Maximum viscosity : 900 mPas Flow rate : 80 l/min (on water) Maximum temperature advised : 50° C Union : turning corrugated seal DN 25 Locking trigger on opened position is possible TOPW1 PVDF/V filling nozzle PVDF - Viton Body: PVDF Seals: Viton TECHNICAL CHARACTERISTICS : Working pressure : 3 bars Maximum viscosity : 900 mPas Flow rate : 50 l/min (on water) Maximum temperature advised : 80° C Outlet diameter :13mm and/or 25 mm Union : turning corrugated seal DN 25 and/or 1 "1/4 male Lever guard TOPW1 PVDF/FEP filling nozzle PVDF - FEP Body: PVDF TECHNICAL CHARACTERISTICS : Working pressure : 3 bars Maximum viscosity : 760 mPas Flow rate: 50 l/min (on water) Maximum temperature advised : 80° C Outlet diameter: 13 mm and/or 25 mm Union : turning corrugated seal DN 25 and/or 1"1/4 male Lever guard POMPES JAPY - Pare d'activites du Moulin - B.P. 15 - 25490 FESCHES-LE-CHATEL - FRANCE TeL +33 (0)3 81 9616 47 Fax +33 (0)3 81 96 12 16 www.pompes-japy.fr - We reserve the right to make modifications without prior notice.