*mydirectindustry

Catalogs
Pompes Japy
DC Gear pumps for oil: HC1 HC2 HC3 HC4

DC Gear pumps for oil: HC1 HC2 HC3 HC4

Product catalog summary

Sector of Use: The document describes a volumetric gear pump designed for the transfer of clean oil. It is intended for intermittent use, with a maximum operation time of 30 minutes. The pump is compact and suitable for distributing and transferring oil from a container or mobile tank, applicable in construction sites, ports, vehicles, and boats.

Pump Specifications: The pump features a suction height of 2.5 meters, which may vary depending on the oil's viscosity. It can handle a maximum liquid temperature of 60°C. The pump includes an integrated bypass within its body. It is powered by a brushed DC motor with an IP55 rating and operates at a rotational speed of 2900 RPM. The pump body is made of aluminum, and the gears are constructed from sintered steel.

Technical Data: The document provides a table with specifications for different pump models (HC1, HC2, HC3, HC4), detailing voltage, power, current, maximum flow rate, pressure, suction/reflection diameter, viscosity range, and weight. Key data includes:

HC1 and HC3 operate on 12 volts, while HC2 and HC4 operate on 24 volts.
Power ranges from 0.15 kW to 0.3 kW.
Maximum flow rates vary from 0.22 m3/h to 0.69 m3/h.
Pressure is consistent at 5 kg/cm2 for HC1 and HC2, and 3 kg/cm2 for HC3 and HC4.
Viscosity range is from 50 to 2000 mm2/s for HC1 and HC2, and 50 to 600 mm2/s for HC3 and HC4.
Weights are 3 kg for HC1 and HC2, and 4.9 kg for HC3 and HC4.

Catalog excerpts

DC Gear pumps for oil: HC1 HC2 HC3 HC4-1

ENAGES POMPES HUILE A ENGR MOTEUR COURANT CONTINU HC1 - HC2 - HC3 - HC4 Pompe avec moteur 12 volts : HC1 et HC3 Pompe avec moteur 24 volts : HC2 et HC4 Pompe volumtrique engrenages pour le transfert d'huile propre. Utilisation en service intermittent (30 minutes maximum) Pompe compacte pour la distribution, le transfert d'huile d'un bidon ou d'un r頩servoir mobile, sur les chantiers, dans les ports, bord de vhicules, d'embarcations, etc... CARACT੉RISTIQUES DE LA POMPE : Hauteur d'aspiration : 2,5 m (variable suivant la viscosit) Temprature maximum du liquide pomp驩 : 60°C By-pass incorpor dans le corps de pompe. Moteur courant continu balai - IP55 Vitesse de rotation : 2900 tr/mn Corps de pompe en aluminium Engrenages en acier fritt頩. HC1-HC2 105,2 I 157,5 76 90 97,4 m HC3■HC4 RĉFRENCE VOLTAGE PUISSANCE INTEENNSAITɉ DBIT MAXI PRESSION DIAMɈTRE VISCOSIT POIDS EN VOLT CC EN KW EN M3/H EN KG/CM2 ASP./REF. mm2/s (Cst) EN KG HC1 12 0,15 16 0,22 5 1/2" 50 ɠ 2000 3 HC2 24 0,15 9 0,24 5 1/2" 50 2000 3 HC3 12 0,3 35 0,66 3 3/4" 50 600 4,9 HC4 24 0,3 18 0,69 3 3/4" 50 ࠠ 600 4,9

Open the catalog to page 1

DC Gear pumps for oil: HC1 HC2 HC3 HC4

DC Gear pumps for oil: HC1 HC2 HC3 HC4

Catalog excerpts

All Pompes Japy catalogs and technical brochures