Manual pump equipped for the transfer of fluids in a potentially explosive atmosphere. The product complies with the ATEX 94/9/CE standard. Pump marking : CE II 2 GD IIC T4 (Tf<120°C). COMPATIBLE FLUIDS : Water, petrol, gasoil, alcohol, toluene, trichlorethylene, acetone, white spirit, etc. COMPONENTS : Body, lid and lever : Cast iron (EN-GJL-200 or 250). Internal mechanism : Brass (Cu Zn39 Pb1 Al B). Couplings : Ø 3/4" Cast iron (EN-GJL-200). Pump axle and screws : Steel (11SMNPB37). Seat gasket : polytetrafluorethylene braid (PTFE). Coupling gasket : PEB (Expanded PTFE). Fixed by 2 lugs (dist. betw. centres 148mm - Ø 12mm). Filter : 300 microns, 304 stainless steel rose (Z6 CN 18.19). Cable length 2 m with clamp for earthing. SEALING OF THE SHAFT : FRENCH MANUFACTURE PTFE braid held by a cast iron compression gland. TECHNICAL CHARACTERISTICS : WEIGHT HOURLY FLOW FLOW RATE - DOUBLE STROKE TOTAL LIFT HEIGHT SEALING CONTROL WITH COMPRESSED AIR INTAKE CAPACITY FLOW BY DOUBLE STROKE ANGULAR TRAVEL OF THE LEVER JAPY PUMPS - Parc d'activités du moulin - B.P. 15 - 25490 FESCHES-LE-CHATEL Phone : +33 3 81 96 16 47 - Fax : +33 3 81 96 12 16 - www.atex-pump.com - Subject to modification without notice