Switzerland Pinking Machine ZE Knife length Stroke Number of cuts per minute Table length left side (feed-in table) Table length right side (take-off table) Table height Geared motor Electrics Dimensions ■ High performance: 32 cutting strokes per minute ■ Easy operation: either by means of hand lever double-feed mechanism with millimeter graduation or through automatic feed control system ■ Simple and fast to handle thanks to direct view onto cutting area ■ Safe operation ensured by reliable light barrier devices on both sides of the knife or by mechanical safety device ■ Maintenance-free, self-lubricating bearings ■ Low energy consumption and noise level due to electric drive with geared motor ■ Solid construction, minimal space requirements Assembling Winding Mounting Pinking Edge Fixing Gross Cut © Polytex AG, Switzerland / Subject to design changes / 340 e - 12.17

Pinking Machine ZE The principle The cutting material is placed on the cutting board. The stops for the desired sample length and width are set according to the dial of the double-feed mechanism. By operating the saddle-feed handle the cutting material is fed precisely as set on the dial. Pushbuttons control the cutting knife movement. The cutting board is rotated by 90° after the material has been cut in strips. The sample strips pass the knife for the second cut. The semi-automatic double-feed mechanism This feed mechanism is extremely accurate. The dial has a setting range from 0–320 mm (0–12.6˝ )...