VibroFlex TriMount VibroFlex TriMount Modular 3D vibration measurement Product brochure

VibroFlex TriMount is a modular setup for non-contact 3D vibration measurements. EXAMPLE: 3D VIBRATION MEASUREMENT OF A DEVICE ON A SHAKER

VibroFlex TriMount is a modular setup for non-contact 3D vibration measurements, consisting of a sturdy sensor holder with three VibroFlex Compact measuring heads, each interacting with a powerful VibroFlex Connect+ front-end. This combination enables precise and reliable vibration measurements with a frequency bandwidth up to 32 MHz for a wide range of applications. Its latest generation FPGA-based signal processing takes care of decoding raw measurement data in displacement, velocity and acceleration. One of the three VibroFlex Compact measuring heads is equipped with an integrated camera,...

Modular 3D vibration measurement HD+ CAMERA FOR PRECISE ALIGNMENT AND DOCUMENTATION SECURE FIXATION OF SENSOR CABLES 3 VIBROFLEX COMPACT MEASURING HEADS FINE ADJUSTERS FOR LASER POSITIONING QUICK RELEASE PLATE TO INTERFACE WITH TRIPOD LASER ALIGNMENT TOOL (REMOVABLE) 3-AXES FINE ADJUSTER FOR MEASURING POSITION

The VibroFlex TriMount draws on the components of the versatile VibroFlex family, VibSoft-Pro and a robust sensor holder. VibroFlex Connect+ VibroFlex Compact VibSoft-PRO Data acquisition Sensor holder for 3D measurement Core of VibroFlex TriMount as modular 3D vibration measurement solution are three front-ends VibroFlex Connect+ with large bandwidth from DC to 32 MHz. Its latest generation FPGA-based signal processing takes care of decoding raw measurement data in displacement, velocity and acceleration. VibroFlex Compact sensor heads with excellent optical sensitivity can easily be applied...

Allows a wide range of applications For detailed technical specifications of the new VibroFlex TriMount laser vibrometer refer to the corresponding datasheets. www.polytec.com/vibroflex Vibrations everywhere The heart beats, wings flap, sounds are sent out and received – life would be much too quiet without vibrations. In the field of industrial research and development, Polytec’s laser Doppler vibrometers are used to study objects of very different sizes including large automobile bodies, airplane fuselages, ship engines and buildings as well as tiny silicon micromachines, hard disk drive components...

Laser Doppler vibrometry – how it works LASER BEAM SPLITTER II BRAGG CELL DETECTOR BEAM SPLITTER III If a light beam is reflected by a moving object, the frequency of the light is shifted proportional to its velocity, a phenomenon referred to as Doppler shift. Through this process, the velocity information becomes coded in the frequency of the light and is subsequently used by the laser Doppler vibrometry to measure the vibration. A high-precision interferometer and digital decoding electronics transform the frequency shift into a voltage signal that can be processed by standard data acquisition...

Shaping the future since 1967 OM_PB_VibroFlex_TriMount_E_52171 2026/07 – Technical specifications are subject to change without notice. High tech for research and industry. Pioneers. Innovators. Perfectionists. Find your Polytec representative: www.polytec.com/contact Polytec GmbH · Germany Polytec-Platz 1-7 · 76337 Waldbronn