P&HTPL8 JUNE 2012 EFFECTIVE: 4th JUNE 2012 Plumbing & Heating Systems The Total Plumbing Solution... The FAST and DEMOUNTABLE system The FAST and PERMANENT system The SLIM and PERMANENT system Trade Price List June 2012

Polypipe Plumbing & Heating Systems: Welcome to the June 2012 edition of the Plumbing and Heating Trade Price List. In this issue you will nd trade prices for the Polyplumb, Polyt and Polysure ranges. NEW Pre-Insulated Pipe Now available from Polypipe Building Products are our Pre-Insulated Piping systems. This new product range includes a double exible pre-insulated, self-compensating, underground pipe, along with all ttings and coupling necessary for an easy installation. Our Pre-Insulated pipes are suitable for “single plot” applications such as remote boilers and heat pumps Available Flexible...

Contents: Standards and Guarantee 2 Introduction Application Information 34 Introduction Product Introduction Jointing, Dismantling and Testing 4-5 6-7 Polyplumb Pipe Product Introduction Jointing, Dismantling and Testing Introduction 16-17 18 Polyt Pipe Standard Pipe - cut length Barrier Pipe - cut length Standard Pipe - coil Barrier Pipe - coil Pipe in Pipe Conduit Pipe - coil 8 8 8 8 8 8 Polyplumb Fittings Couplers Elbows Tees Reducers Tank/Tap Connectors Adaptors Gate and Radiator Valves Radiator Connector Bends Blank Ends Service Valves and Stop Cocks Wall Plate Elbows Wall Plate Tees 9...

The FAST & PERMANENT system Polyplumb is an integrated flexible plumbing system, incorporating polybutylene pipes and a complementary range of push-fit fittings. It can be used in hot and cold water supply, and radiator and floor heating installations. The system offers a high degree of reliability, achieved through a product design that has been tried and tested over the past 30 years. PERMANENT system • WRAS Listed in the WRAS Water Fittings and Materials Directory Standards Manufacturing Quality Assurance - in accordance with BS EN ISO 9002 (BSI registered firm Installation Standard - to follow...

The system offers a number of benefits, including: • Time efficient, no nonsense one step joint process • High performance stainless steel grab ring ensures superb joint integrity • Demountable only by dis-assembling, reducing potential for tampering • The original Polypipe pushfit plumbing system used and relied on by customers • Polyplumb fittings are also used extensively in our underfloor heating systems. For further information refer to Product Guide or www.totallyplumbing.com Polypipe Plumbing & Heating Systems Trade Price List: June 2012

Polyplumb Jointing, Dismantling and System Testing There are five vital stages to successfully jointing the Polyplumb system. Step 1a: Cutting Polyplumb pipes Firstly check that the pipe is not scored or scratched in any way and if it is so cut back to a point where there is no damage present Always use one of the approved pipe cutters A slight rotation of the pipe when cutting will help make cutting easier. Never use a hacksaw and always cut on a depth insertion mark These "K" shaped marks are equally spaced along the pipe and indicate the depth required for full insertion intoa Polyplumb socket...

The FAST & PERMANENT system Polyplumb Jointing, Dismantling and System Testing Dismantling a Polyplumb joint System testing Polyplumb ttings must not be dismantled for any reason prior to jointing. Pressure testing of the pipe system is essential however a successful pressure test Step 1: Procedure for using the component pack of spares Dismantling the using the following steps is not a guarantee of complete and correct installation joint and only ensures that pipes have been inserted into ttings passed both the and the pipe with all the socket components present on the pipe end should be pulled...

The FAST & PERMANENT system Polyplumb Standard & Barrier Pipe - 10, 15, 22 & 28mm O.D. Standard Polybutylene Pipe Cut Length Pack Qty Code No Price Each 15mm x 3 metre Cut Length 10 PB315 £5.29 15mm x 6 metre Cut Length 10 PB615 £10.66 22mm x 3 metre Cut Length 10 PB322 £10.02 22mm x 6 metre Cut Length 10 PB622 £20.13 28mm x 3 metre Cut Length 10 PB328 £13.79 28mm x 6 metre Cut Length 10 PB628 £27.50 Barrier Polybutylene Pipe Cut Length Pack Qty Code No Price Each 15mm x 3 metre Cut Length 10 PB315B £5.93 15mm x 6 metre Cut Length 10 PB615B £11.62 22mm x 3 metre Cut Length 10 PB322B £11.23 22mm...

The FAST & PERMANENT system Polyplumb Fittings - 10, 15, 22 & 28mm O.D. Straight Coupler Pack Qty Code No Price Each 10mm Straight Coupler 10 PB010 £3.05 15mm Straight Coupler 10 PB015 £1.89 22mm Straight Coupler 10 PB022 £2.51 28mm Straight Coupler 5 PB028 £7.21 Elbow Pack Qty Code No Price Each 10mm Elbow 10 PB110 £3.37 15mm Elbow 10 PB115 £2.21 22mm Elbow 10 PB122 £3.25 28mm Elbow 5 PB128 £7.70 Spigot Elbow Pack Qty Code No Price Each 10mm Spigot Elbow 10 PB1010 £3.51 10mm x 15mm Spigot Elbow 10 PB101510 £3.21 15mm Spigot Elbow 10 PB1015 £2.45 22mm Spigot Elbow (not suitable for use with compression...

The FAST & PERMANENT system Polyplumb Fittings - 10, 15, 22 & 28mm O.D. Spigot Reducer Pack Qty Code No Price Each 15mm x 10mm Spigot Reducer 5 PB815 £1.58 22mm x 15mm Spigot Reducer (22mm end not suitable for use with compression ttings) 5 PB822 £1.75 28mm x 22mm Spigot Reducer (not suitable for use with compression ttings) 5 PB828 £3.30 Socket Reducer Pack Qty Code No Price Each 15mm x 10mm Socket Reducer 10 PB1815 £2.91 22mm x 15mm Socket Reducer (not suitable for use with compression ttings) 10 PB1822 £2.27 28mm x 22mm Socket Reducer (not suitable for use with compression ttings) 5 PB1828...

The FAST & PERMANENT system Polyplumb Fittings - 10, 15, 22 & 28mm O.D. MDPE Polyfast Adaptor (cold water only) 15mm x 20mm MDPE Adaptor 15mm x 25mm MDPE Adaptor 22mm x 25mm MDPE Adaptor 22mm x 32mm MDPE Adaptor Pack Qty Code No Price Each 28mm x 32mm MDPE Adaptor Gate Valve (Brass) 5 PB422015 £3.86 5 PB422515 £4.76 5 PB422522 £4.94 5 PB423222 £9.43 5 All include MDPE 12 Bar Plastic Pipe Stiffener PB423228 £9.88 Pack Qty Code No Price Each 15mm Gate Valve 5 PB3115 £11.84 22mm Gate Valve 5 PB3122 £16.64 Thermostatic Radiator Valve (Plated Brass) 10mm Thermostatic Radiator Valve 15mm Thermostatic...