100 FT Type N to Type N M/M 195 Series Low Loss Cable Jumper CA195LL028-100FT Configuration • Connector 1: N Male • Connector 2: N Male • Cable Type: 195 Series OUTER CONDUCTOR • Shielding Effectivity > 90 dB • 80% Phase Velocity DIELECTRIC SOLID CENTER CONDUCTOR • Low Insertion Loss • Double Shielded • PE Jacket • One Time Bend Radius of 0.5 Inches Applications • General Purpose • Laboratory Use • Antenna Installations • Land Mobile Radio & Other Communication Systems • Cellular & Wi-Fi Systems Description PolyPhaser CA195LL028-100FT is a 100 foot Type N to Type N M/M 195 Series Low Loss Cable Jumper is built using high quality components by skilled technicians to ensure a reliable product. The Type N Male cable jumper connections are designed to industry standard interface dimensions to ensure superior performance. If you have an immediate need, these products are available to ship same day. This high-quality RF coaxial assembly is perfect in many RF Interconnect applications such as industrial / commercial, communications systems, military / defense, and many other applications. The CA195LL028-100FT Type N to Type N cable assembly is the perfect companion to PolyPhaser line of RF surge protection devices particularly when used as an antenna jumper cable. The 195 Series coax used in these Type N to Type N assemblies is a 0.195 inch diameter coax with a black PE jacket. This cable’s foam PE dielectric is low loss material with a VoP of 80% reducing the attenuation when compared to solid dielectric coax cables. PolyPhaser Low Loss 195 Series coax has a solid center conductor and uses a double shield comprised of a wire braid over a foil tape construction providing >90% shielding effectivity. The construction and materials of the CA195LL028-100FT result in a coax cable assembly with 0.5 inch one time bend radius and a repeat bend radius of 2 inches. The cable assembly’s combination of Type N to Type N Male/Male and 195 Series Low Loss Cable supports a maximum operating frequency of 5800 MHz. Detailed specifications for this configuration includes layout drawings and key performance specifications. This product is built and tested by our expert technicians to fulfill your cable assembly needs. Polyolefin heat shrink strain relief boots add additional strength on both ends of this 100 foot assembly. These epoxy filled heat shrinks provide strain relief to help prevent damage from over-bending the assembly ends. Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certifications: 100 FT Type N to Type N M/M 195 Series Low Loss Cable Jumper CA195LL028-100FT 1 CA195LL028-100FT REV 1.1 | © 2020 Infinite Electronics, Inc. PolyPhaser is a registered trademark of Infinite Electronics

rPolyPhaser an INFINITE] brand 100 FT Type N to Type N M/M 195 Series Low Loss Cable Jumper Electrical Specifications VSWR Velocity of Propagation RF Shielding 90 Capacitance Operating Voltage (AC) Jacket Spark % dB pF/ft [pF/m] Vrms Vrms Electrical Specification Notes: The Insertion Loss data above is based on the performance specifications of the coax cable and connectors used in this assembly. Insertion Loss is estimated as 0.1 dB per connector. Mechanical Specifications Size Length 1,200 in [30.48 m] Diameter 0.195 in [4.95 mm] Cable Cable Type Impedance Inner Conductor Type Inner Conductor...

rPolyPhaser an INFINITE] brand 100 FT Type N to Type N M/M 195 Series Low Loss Cable Jumper Type Specification Impedance Contact Material and Plating Dielectric Type Body Material and Plating Coupling Nut Material and Plating Hex Size Torque N Male MIL-STD-348A 50 Ohms Brass, Gold Teflon Brass, Tri-Metal Brass, Tri-Metal 18 mm 9 in-lbs [1.02 Nm] N Male MIL-STD-348A 50 Ohms Brass, Gold Teflon Brass, Tri-Metal Brass, Tri-Metal 18 mm 9 in-lbs [1.02 Nm] Environmental Specifications Temperature Operating Range -40 to +85 deg C Compliance Certifications Plotted and Other Data Notes: • Values at 25°C,...

LOW LOSS 195 SERIES COAX ALL DIMENSIONS SHOWN ARE FOR REFERENCE ONLY. CABLE LENGTH (L) TOLERANCES: UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. CABLES 36" AND UNDER HAVE 1 LABEL CENTERED. CABLES OVER 36" HAVE 2 LABELS, ONE AT EACH END 6.0" FROM THE FRONT OF THE CONNECTOR. LENGTH MEASURED FROM CONTACT TO CONTACT SIZE CAGE CODE DRAWN BY DATE SELLIS THE INFORMATION AND DESIGN...