Catalogs >
Polyfluor Plastics bv >
PTFE glass fibre, type BP

PTFE glass fibre, type BP
1Pages

Catalog excerpts

Our type BP has a smooth surface. The base material is a glass fibre impregnated with PTFE. This type of PTFE glass fibre is used in many applications. For example in industrial processes, for which the non-stick properties are most important. PTFE glass fibre is often used in the packing industry for heat-seal machines, but also very suitable for use at home as a baking foil. These sheets out of PTFE fabric can be cut in almost every desired size. Key properties PTFE glass fibre • Wide temperature range from -200°C to +260°C (for "stic" types -73°C to +250°C) • Excellent chemical resistance • Good anti-stick properties • Easy to clean • Low friction coefficient from 0.04 to 0.10 (depending on load, transport speed and temperature) • Excellent electrical, insulation and dielectric properties • Foods suitable (USFDA) Standard packing unit of PTFE glass fibre are rolls of 30 mtr, in various widths. Other lengths are available on request. The most common thicknesses are 0,08 mm/0,11 mm/0,12 mm and 0,21 mm. The standard colour of PTFE glass fibre is light brown. Other colours available on request. Our sales engineers are at your service when you want to determine the right formula for your application. Nominal thickness smooth surface smooth surface smooth surface smooth surface smooth surface The above mentioned types are our standard. Polyfluor Plastics bv Minervum 7006, NL-4817 ZL Breda T +31 (0)76 7920000 F +31 (0)76 7920030

Open the catalog to page 1

PTFE glass fibre, type BP 1Pages

Catalog excerpts

All Polyfluor Plastics bv catalogs and technical brochures

PTFE glass fibre, type BP
1Pages