Car Park Jet Fan, direct driven series, AAJM, DN 315, 355, 400 Temperature class 40°C continuous temperature

Product catalog summary

Specifications:
The Jet-Ventilator series VSTI, DN 315, 355, 400 is designed for handling smoke gases up to 300°C for 120 minutes and for ventilation up to a maximum continuous temperature of 70°C. It can operate in both unidirectional and reversible modes. The construction includes an aluminum pipe housing with a riveted motor support and ceiling suspension. The surface is protected by aluminum, and the unit features aerodynamic inlet and exhaust cones.

Components:
The ventilator includes pipe silencers on both sides with abrasion-resistant heat and noise insulation according to DIN 4102, and an aluminum casing. The impeller is aerodynamically optimized for high-performance operation with adjustable blades made from a corrosion-resistant aluminum alloy. It is dynamically balanced according to DIN ISO 1940-1, with a balancing quality of G 6.3.

Motor and Electrical Specifications:
The unit is equipped with a three-phase motor in IEC standard configuration B3, with protection class IP 55 and insulation class H. The motor power is selected for a cold start at 20°C. Electrical wiring is facilitated through an external terminal box or repair switch. The unit includes a fire gas cable with radial construction and protective sheathing.

Standards and Testing:
The ventilator complies with fire gas testing according to DIN EN 12101-3:2002 and accuracy class 3 according to DIN 24 166. Performance measurements are conducted according to DIN 24163.10/2010.

Dimensions and Weight:
The dimensions vary with the model, with widths ranging from 440 mm to 560 mm, heights from 345 mm to 430 mm, and total lengths from 1963 mm to 2183 mm. The weight ranges from 42 kg to 59 kg, depending on the motor size.

Additional Features:
Optional accessories include adjustable deflection beams (Z25) and wire guards (Z05). Construction tolerances adhere to DIN 2768.

Catalog excerpts

Car Park Jet Fan, direct driven series, AAJM, DN 315, 355, 400 Temperature class 40°C continuous temperature-1

Jet-Ventilator, direktgetrieben Serie VSTI, DN 315, 355, 400 Geeignet für Brandgase bis 300°C / 120min, und Be- und Entlüftung bis max. 70 °C Dauertemperatur im gleichlaufenden oder reversierbaren Betrieb. Bestehend aus: Rohrgehäuse aus Aluminium als Teilgehäuse mit eingenietetem Motorträger und Aufhängung. Optimaler Oberflächenschutz durch Aluminium. Beidseitig am Teilgehäuse montierten Rohrschalldämpfern mit vollwertiger, abriebfester Wärme-/Schalldämmung nach DIN 4102 und Verkleidung aus Aluminium. Aerodynamisch ausgebildete Einström- und Ausblasdüse. Aerodynamisch reversierbares Laufrad für Hochleistungsbetriebmit im Stillstand verstellbaren profilierten Flügeln aus korrosionsbeständiger Aluminiumlegierung. Dynamisch ausgewuchtet nach DIN ISO 1940-1, Wuchtgüte G 6.3< 4.0 mm/s für Unterbaugruppe elastisch. Drehstrommotor / IEC - Brandgasmotor in Bauform B3 in Lüfterausführung, Schutzart IP 55 / Isoklasse H. Motorleistung gewählt für Kaltanlauf bei 20 °C. Brandgaskabel, radial ausgeführt, mit Schutzmantelung. Elektrische Verdrahtung am außenliegenden Klemmen kasten oder Reparaturschalter. Brandgasprüfung nach DIN EN 12101-3:2002 Bei Einbau, Beachtung der Bundes-, sowie der regionalen Brandschutzverordnungen! Genauigkeitsklasse 3 nach DIN 24 166 26 39 64 30 49 77 0 10 20 30 40 50 60 70 80 90 SAJM0315B SAJM0355B SAJM0400B SAJM0315S SAJM0355S SAJM0400S Thrust [N] ThrustAAJM50Hz Car Park Jet Fan, direct driven series, AAJM, DN 315, 355, 400 Temperature class 40°C continuous temperature DLK Ventilatoren GmbH Dimensions and design subject to alteration D-74214 Schöntal-Berlichingen Telefon: +49/(0) 79 43 / 9102-0 Telefax: +49/(0) 79 43 / 9102-10 e-mail: [email protected] Internet: http://www.pollrichdlk.com AAJM 315-10-2/4 355-10-2/4 400-10-2/4 Measuring D1 (mm) 317 357 402 Width B (mm) 440 500 560 Height H (mm) 345 385 430 Cylindrical silencer LRD (mm) 750 800 850 Lenght without redirecting LV (mm) 1820 1920 2020 Total length LG (mm) 1963 2073 2183 Ceiling suspension E (mm) 320 370 420 Ceiling suspension F (mm) 270 270 270 Weight (kg) * 42 45-47 50-59 AAJM series Car Park Jet-Fan, direct driven Fan size range: DN 315, 355, 400 Application: For ventilation of up to 40°C continuous temperature. Technical data: (50Hz) V max = 10476 m³/h Thrust max = 77 N P = 0,95/0,25 – 2,5/0,65 kW * fan incl. Motor weight (dependent on the motor size) Car Park Jet Fan, direct driven Series AAJM (Axial Jetfan Motor) DN 315, 355, 400. For ventilation of up to 40°C continuous temperature in unidirectional or reversing operation. Assembly-friendly setup via weight-optimised construction and the use of aluminum. Comprised of: Pipe housing made of aluminum as partial housing with riveted motor support and ceiling suspension made of high-grade-steel. Polygonal silencers mounted on both sides of the partial housing with complete, abrasion-resistant heat and noise insulation according to DIN 4102 and housing made of aluminum, and an inner sendzimir galvanised perforated plate. Aerodynamically formed inlet cone and exhaust cone. Aerodynamically optimised impeller for unidirectional or reverse operation with profiled blades made of corrosion-resistant aluminum alloy that can be adjusted during standstill. Balanced according to DIN ISO 1940-1, balancing quality G 6.3. 3-phase motor/ IEC standard motor in configuration B3 for fans, protection class IP 55 / Iso class F. Motor power selected for cold start at 20°C. Oil flex SY cable, radially constructed with protective sleeve. Electrical wiring on outer terminal box or repair switch. Accuracy class 2 according to DIN 24 166. Construction tolerances according to DIN 2768. Performance measurement according to DIN 24163. Accessory beam adjustable deflection Z25 Accessory Wire guard Z05 10/2010 Maximum values are presented above, performance might be different, when using another motor

Open the catalog to page 1