Catalogs >
POLAR Cutting Technologies GmbH >
Cutting Machine D 66

Cutting Machine D 66
2Pages

Catalog excerpts

Description of the Polar D 66 ECO The cutter POLAR 66 is designed for one-shift operation. The precise and gentle swing cut is carried out hydraulically. Thus, the time of the knife spent in the lower dead end can be adapted to the material. The ultra-smooth stainless table surface allows an easy handling of the material even without air jets. Within a wide setting range the clamping pressure can be adjusted infinitely to each cutting material by means of a turning knob with scale. Bright LEDs mark the cutting line clearly visible for the operator. The operation of the machine is done via an ergonomically positioned control panel with 5.5'' monochrome display and additional membrane keypad. Recurring cutting sequences can be memorized (memory capacity 198 programs) and adapted at any time. The creation of the cutting programs is done either manually or menu-driven and intuitively via block programming. To optimize the cutting quality the pre-clamping time can be adjusted according to the material. Customer benefits Extensive programming options with a memory capacity of 198 programs Minimal maintenance requirements due to the use of novel materials Extended operating life of the knife as well as faster knife change thanks to POLAR OptiKnife with knife fine adjustment in the lower dead end Machine frame with optimized stability for optimum absorption of cutting forces and greatest cutting accuracy POLAR-Mohr Maschinenvertriebsgesellschaft GmbH & Co. KG Hattersheimer StraGe 16-42 \\ 65719 Hofheim \\ Germany info@polar-mohr.com \\ www.polar-mohr.com Edition: 05.2019 \\ Subject to technical alterations. Further technical data are available for download on our website.

Open the catalog to page 1

Description of the Polar D 66 PLUS The cutter POLAR 66 is designed for one-shift operation. The precise and gentle swing cut is carried out hydraulically. Thus, the time of the knife spent in the lower dead end can be adapted to the material. The ultra-smooth stainless table surface allows an easy handling of the material even without air jets. Within a wide setting range the clamping pressure can be adjusted infinitely to each cutting material by means of a turning knob with scale. Bright LEDs mark the cutting line clearly visible for the operator. The operation of the machine is done via...

Open the catalog to page 2

Cutting Machine D 66 2Pages

Catalog excerpts

All POLAR Cutting Technologies GmbH catalogs and technical brochures

Cutting Machine D 66
2Pages