Cutter D 56 ECO
2Pages

Catalog excerpts

Description of the D 56 ECO The cutter POLAR 56 is designed for one-shift operation. The precise and gentle swing cut is carried out hydraulically. Thus, the time of the knife spent in the lower dead end can be adapted to the material. The ultra-smooth stainless table surface allows an easy handling of the material even without air jets. Within a wide setting range the clamping pressure can be adjusted infinitely to each cutting material by means of a turning knob with scale. Bright LEDs mark the cutting line clearly visible for the operator. The operation of the machine is done via an ergonomically positioned control panel with 5.5'' monochrome display and additional membrane keypad. Recurring cutting sequences can be memorized (memory capacity 198 programs) and adapted at any time. The creation of the cutting programs is done either manually or menu-driven and intuitively via block programming. To optimize the cutting quality the pre-clamping time can be adjusted according to the material. Customer benefits Extensive programming options with a memory capacity of 198 programs Easy knife change with automatic interruption in the lower dead end and knife fine adjustment from the front Machine frame with optimized stability for optimum absorption of cutting forces and greatest cutting accuracy Minimal maintenance requirements due to the use of novel materials Edition: 06.2019 \\ Subject to technical alterations. Further technical data are available for download on our website. POLAR-Mohr Maschinenvertriebsgesellschaft GmbH & Co. KG Hattersheimer StraGe 16-42 \\ 65719 Hofheim \\ Germany info@polar-mohr.com \\ www.polar-mohr.com

Open the catalog to page 1

Description of the Polar D 56 PLUS The cutter POLAR 56 is designed for one-shift operation. The precise and gentle swing cut is carried out hydraulically. Thus, the time of the knife spent in the lower dead end can be adapted to the material. The ultra-smooth stainless table surface allows an easy handling of the material even without air jets. Within a wide setting range the clamping pressure can be adjusted infinitely to each cutting material by means of a turning knob with scale. Bright LEDs mark the cutting line clearly visible for the operator. The operation of the machine is done via...

Open the catalog to page 2

Cutter D 56 ECO 2Pages

Catalog excerpts

All POLAR Cutting Technologies GmbH catalogs and technical brochures

Cutter D 56 ECO
2Pages