Transomat Loading TR 2 BL 150-5
4Pages

Description of the TR 2 BL 150-5 The loading Transomat makes the feeding of the highspeed cutter much easier and optimizes the entire workflow. It is no longer necessary to load the material laboriously from the pile onto the machine yourself, but it is automatically taken from the stack and pulled onto the Transomat pallet. The Transomat unit takes off reams with a height up to the full clamp opening. When using reflection keys or chip marker (optional) you can even take off precise quantities (for example using counting slips). The material is taken off lengthwise which means on the short side. A pusher moves the ream onto the rear table of the High-Speed cutter. While the cutting machine is unloaded the new ream to be cut can be transported onto the rear table. The next loading process has to be started manually in this case. This way, the cutting machine output is considerably increased. The Transomat unit TR 4 BL 150-5 is always arranged on the left of the high-speed cutter. Customer benefits Increases the high-speed cutter efficiency by up to 100%, because the next ream can be transported into the cutter while the present one is unloaded Very easy to handle, no set-up times Improves ergonomic conditions, because lifting heavy loads is no longer necessary POLAR-Mohr Maschinenvertriebsgesellschaft GmbH & Co. KG Hattersheimer Straße 16 – 42 \\ 65719 Hofheim \\ Germany info@polar-mohr.com \\ www.polar-mohr.com Technical data Application for size min. Height of ream max. (with slip) Stroke height min. (height of pallet) Carrying capacity, max Dimensions (W x D x H) Weight For further technical details, please visit our website Status: 06.2019 \\ Subject to technical alterations.

Description of the TR 4 BL 150-5 The loading Transomat makes the feeding of the highspeed cutter much easier and optimizes the entire workflow. It is no longer necessary to load the material laboriously from the pile onto the machine yourself, but it is automatically taken from the stack and pulled onto the Transomat pallet. The Transomat unit takes off reams with a height up to the full clamp opening. When using reflection keys or chip marker (optional) you can even take off precise quantities (for example using counting slips). The material is taken off lengthwise which means on the short...

Description of the TR 3 BL 160-6 The POLAR Transomat TR 3 BL 160-6 is predominantly used for the large-size format. The Transomat for loading makes the feeding of the high-speed cutter much easier and optimizes the entire workflow. It is no longer necessary to load the material laboriously from the pile onto the machine yourself, but it is automatically taken from the stack and pulled onto the Transomat pallet. The Transomat unit takes off reams with a height up to the full clamp opening. When using reflection keys or chip markers (optional) you can even take off precise quantities (for...

Description of the TR 3 BL 160-7S The POLAR Transomat TR 3 BL 160-7S is predominantly used for the large-size format. The loading Transomat makes the feeding of the high-speed cutter much easier and optimizes the entire workflow. It is no longer necessary to load the material laboriously from the pile onto the machine yourself, but it is automatically taken from the stack and pulled onto the Transomat pallet. The Transomat unit takes off reams with a height up to the full clamp opening. When using reflection keys or chip markers (optional) you can even take off precise quantities (for...