Pressing Station PST presses the air off the material to be cut and forms compact reams Description Pressing Station PST The POLAR pressing station is mainly used for processing labels, because this requires utmost precision. Another application is the compression of voluminous cutting material. The material to be cut is transferred to the pressing station manually or automatically with the loading Transomat TRB. By forcing out the excessive air cushions in the cutting material stack a solid, stable block is formed that can be processed more easily. After the pressing process the ream can either be manually pushed onto the cutting machine front table or transported with the Autotrans gripper direct to the machine rear table, depending on where the pressing station is positioned. Technical data ^ Minimizes cutting tolerances by pressing out the air cushions Higher cutting precision even when dealing with high cutting reams ^ Time consuming pre-pressing in the high-speed cutter is no longer necessary Edition: 05.2019 \\ Subject to technical alterations. Further technical data are available for download on our website. POLAR-Mohr Maschinenvertriebsgesellschaft GmbH & Co. KG Hattersheimer Strafce 16-42 \\ 65719 Hofheim \\ Germany [email protected] \\ www.polar-mohr.com