CuttingSystem 200 PACE Description CuttingSystem 200 PACE The Autoturn turning gripper with automatic aligning gauge is the centre of the PACE cutting system. The gripper system turns the ream on the rear table, either 90 or 180 degrees, to the right or left-hand side. Then an automatic gauge positions the ream. The cut is released automatically. In this way, undivided reams can be cut without any operator. If further cuts are needed, the operator continues the cutting job and turns the individual products manually. A POLAR Autotrim high-speed cutter, which automatically removes the cutting waste, is a precondition for this highly automated PACE cutting system. The unloading Transomat makes it much easier to unload the high-speed cutter. This optimizes the entire workflow. The intermediate and final products are manually pushed onto the Transomat transport pallet. In automatic cycles, they are precisely stacked on the pallet. Fields of applications This system is typically used by companies working with at least two printing presses for medium-size format or larger, who wish to replace an existing cutting system. It is recommended for a capacity utilization of more than eight hours, jobs with at least six cutting reams to be processed, and an average number of a max. 8 cuts Edition: 04.2019 \\ Subject to technical alterations. Further technical data are available for download on our website. Customer benefits ^ Excellent performance: The system processes up to 45 reams in 60 minutes ^ Compared with a manual system, it increases the output up to 100 %, or reduces labour costs by saving one person ^ Ensures high flexibility, because you can easily change between automatic and manual operation ^ Provides exactness and consistent cutting quality. Twenty-four hours a day. POLAR-Mohr Maschinenvertriebsgesellschaft GmbH & Co. KG Hattersheimer StraGe 16-42 \\ 65719 Hofheim \\ Germany [email protected] \\ www.polar-mohr.com