Description Compucut® CONTROL Compucut® CONTROL is the simple automatic solution for generating cutting programs from CIP 3/4 prepress files with just a click of a mouse before transferring them to a POLAR high-speed cutter. Functions Configurable user interface Cutting programs are created and transferred with just a click of the mouse The cutting program is created in compliance with a recommended or self-selected cutting sequence Additional machine functions are incorporated and programmed automatically The cutting program can be transferred to several machines ^ ESPV (external cutting program management) available as external program memory ^ Real-time imaging is also possible (N PRO only) ^ Graphical sheet displaying is also possible (N PLUS option) Commissioning ^ Installation is needed as the program runs directly from a separate PC ^ The user interface is available in several languages The cutter must be enabled Requirements ^ PC: Processor: 1.4 GHz - for real-time imaging: 3.5 GHz (must be provided by the customer) ^ Operating system: Windows 7, Windows 8, Windows 10 - for real-time imaging: Windows 7/10 (64 bit) ^ Memory: RAM: 1 GB; for real-time imaging 16 GB; Hard disk capacity: 10 GB Hardware: USB connection; Network card: 10 Mbit; for real-time imaging 1 Gbit POLAR-Mohr Maschinenvertriebsgesellschaft GmbH & Co. KG Hattersheimer Strafce 16-42 \\ 65719 Hofheim \\ Germany [email protected] \\ www.polar-mohr.com ^ Display: 1280x1024 / 1440 x900; for real-time imaging: 1920x1080 ^ N PRO, N PLUS or D PLUS cutters Scope of delivery USB stick with software, sample data and short instruction manual ^ Network card (LEA11 / DBR card) ^ High-speed cutter enabler Pre-press files: cip 3/4 (ppf, jdf) Customer benefits ^ Cutting process visualization (N PLUS option) ^ Real-time imaging display (N PRO or N PRO HD only) ^ Time for programming the high-speed cutter is no longer needed Increases the high-speed cutter's productivity The amortization period is less than six months in most cases ^ The error rate will be considerably reduced Programs with process visualization means that anyone can operate the high-speed cutter Compucut® AUTO-CONTROL option Same scope as for Compucut® CONTROL Additional automated cutting program creation without operator intervention (the optimum cutting sequence with the fewest turns / cuts is automatically selected) Manual intervention is possible at any time Edition: 04.2019 \\ Subject to technical alterations.