Catalogs >
POL-EKO sp.k. >
Compact Line DCL-1800 SS WALK-IN

Compact Line DCL-1800 SS WALK-IN
2Pages

Catalog excerpts

Fume hood Data sheet Compact Line DCL-1800 SS WALK-IN Standard equipment for fume hoods: - structure entirely made of galvanized steel without the use of wood-based materials - toughened glass window, lifted manually with counterweight, opened upwards with a lock on height 500 mm (max 1850mm), additionally sliding windows (right / left). The window has a system preventing the uncontrolled fall of the window - energy-saving linear LED lighting separated from the fume hood's working chamber with a glass pane - a double rear wall system with exhaust gaps in the upper and lower part ensuring the correct extraction of vapors that are lighter or heavier than air, without swirls and dead zones - safety ﬂap in the ceiling ensuring decompression in the event of uncontrolled pressure increase in the working chamber - full monitoring set (Schneider brand) of air ﬂow velocity in the fume cupboard window compliant with the PE-EN 14175 standard. : PN-EN 14175; PN-EN 14056; PN-EN 13150

Open the catalog to page 1

TECHNICAL DATA - DIMENSIONS overall dims [mm] width A working space dims (mm) width D TECHNICAL DATA recommended airﬂow [m3/h] required capacity of the ventilation system [m/s] 0,3 - 0,5 nominal power [W] power supply diameter of the air outlet stub [mm] electrical insulation standard ventilation system double rear wall frame and housing material working chamber wall ﬁnishing standard: - FM 550-A-0-E controller with a speed sensor AFS 100 in the fume hood window and the FA-0025-3 operator panel option: - ICM 500-F-EU controller with ﬂow control - ICM 500-FP-EU controller with ﬂow control...

Open the catalog to page 2

Compact Line DCL-1800 SS WALK-IN 2Pages

Catalog excerpts

All POL-EKO sp.k. catalogs and technical brochures

Compact Line DCL-1800 SS WALK-IN
2Pages