*mydirectindustry

Catalogs
POL-EKO sp.k.
Compact Line DCL-1500 BB

Compact Line DCL-1500 BB

1 / 2 PagesView full catalog

Compact Line DCL-1500 BB

Product catalog summary

Standard Equipment for Fume Hoods:

Constructed entirely from galvanized steel, avoiding wood-based materials.
Features a toughened glass window that opens upwards manually with a counterweight and locks at 500 mm, with a maximum opening of 810 mm. It includes a system to prevent uncontrolled falls.
Energy-efficient linear LED lighting is separated from the working chamber by a glass pane.
Double rear wall system with exhaust gaps ensures proper vapor extraction without swirls or dead zones.
Safety flap in the ceiling for decompression in case of pressure increase.
Full monitoring set by Schneider for air flow velocity, compliant with PE-EN 14175 standards.

Technical Data - Dimensions:

Overall dimensions: Width 1500 mm, Height 1235-1320 mm, Depth 700 mm.
Working space dimensions: Width 1434 mm, Window width 1354 mm, Height 1000 mm, Depth 430 mm.

Technical Data:

Recommended airflow: 750 - 1200 m3/h.
Required ventilation system capacity: 0.3 - 0.5 m/s.
Nominal power: 46 W, Power supply: 230 VAC 50Hz.
Air outlet stub diameter: Ø 200 mm.
Electrical insulation class: I.
Standard ventilation system: Double rear wall.
Illumination: LED, class A++, installed outside the working chamber.

Monitoring Set:

Standard: FM 550-A-0-E controller with AFS 100 speed sensor and FA-0025-3 operator panel.
Optional: ICM 500-F-EU controller with flow control, ICM 500-FP-EU with BMS cooperation, other Schneider controllers available on request.

Window Raising:

Standard: Manual with counterweight (lock at 500 mm, max 810 mm).
Optional: SC 500 - Auto Protect system with foot or panel switch.

Frame and Housing Material:

Frame made entirely of galvanized steel.
External housing made of galvanized and epoxy-painted steel.
Working chamber wall finished with galvanized sheet, powder-coated with epoxy paint.

Worktop Options:

Available materials: Monolithic ceramics with marine edge, Phenolic resin, epoxy, Stainless steel AISI 304, 316.

Catalog excerpts

Data sheet Tabletop Fume hood Standard equipment for fume hoods: - structure entirely made of galvanized steel without the use of wood-based materials - toughened glass window, lifted manually with counterweight, opened upwards with a lock on height 500 mm (max 810mm), the window has a system preventing the uncontrolled fall of the window - energy-saving linear LED lighting separated from the fume hood's working chamber with a glass pane - a double rear wall system with exhaust gaps in the upper and lower part ensuring the correct extraction of vapors that are lighter or heavier than air, without swirls and dead zones - safety ﬂap in the ceiling ensuring decompression in the event of uncontrolled pressure increase in the working chamber - full monitoring set (Schneider brand) of air ﬂow velocity in the fume cupboard window compliant with the PE-EN 14175 standard. : PN-EN 14175; PN-EN 14056; PN-EN 13150

Open the catalog to page 1

TECHNICAL DATA - DIMENSIONS overall dims [mm] width A working space dims (mm) width D TECHNICAL DATA recommended airﬂow [m3/h] required capacity of the ventilation system [m/s] power supply diameter of the air outlet stub [mm] electrical insulation standard ventilation system double rear wall illumination installed outside the working chamber LED, class A ++, through insulating glass / from operator panel frame and housing material standard: - FM 550-A-0-E controller with a speed sensor AFS 100 in the fume hood window and the FA-0025-3 operator panel option: - ICM 500-F-EU controller with ﬂow...

Open the catalog to page 2

All POL-EKO sp.k. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list