*mydirectindustry

Catalogs
POL-EKO sp.k.
Compact Line DCL-1200 SS

Compact Line DCL-1200 SS

1 / 2 PagesView full catalog

Compact Line DCL-1200 SS

Product catalog summary

Standard Equipment for Fume Hoods:

Constructed entirely from galvanized steel, avoiding wood-based materials.
Worktop height is 900mm, made of monolithic ceramics with a raised rim and a suspended ceramic sink (280x80mm).
Features a toughened glass window that lifts manually with a counterweight, lockable at 500mm height, with a maximum opening of 810mm. It includes a sliding glass system (right/left) and a mechanism to prevent uncontrolled dropping.
Equipped with 2 electric sockets (230V, 50Hz) and 2 water spouts with valves on the BROEN front panel.
Energy-efficient linear LED lighting, separated by a glass pane.
Double system back wall with exhaust slots for proper vapor extraction, preventing turbulence and dead zones.
Safety flap in the ceiling for decompression in case of pressure increase.
Full monitoring set (Schneider brand) for air flow velocity, compliant with PE-EN 14175 standard.
CE Declaration of Conformity: PN-EN 14175; PN-EN 14056; PN-EN 13150.

Technical Data - Dimensions:

Overall Dimensions (mm): Width 1280, Height 2325-2600, Depth 960.
Working Space Dimensions (mm): Width 1150, Window Width 965, Height 1220, Depth 635.

Technical Data:

Recommended airflow: 600 - 950 m3/h.
Required ventilation system capacity: 0.3 - 0.5 m/s.
Nominal power: 46W, Power supply: 230 VAC 50Hz.
Air outlet stub diameter: Ø 200mm.
Water supply: G 1/2'' male thread, Sewage connection diameter: Ø 50mm.
Electrical insulation class: I.
Standard ventilation system: Double rear wall.
Illumination: LED, class A++, installed outside the working chamber.
Monitoring set options include FM 550-A-0-E controller with speed sensor AFS 100, and optional ICM 500-F-EU or ICM 500-FP-EU controllers for flow control and BMS cooperation.
Window raising options: Standard manual with counterweight, optional SC 500 - Auto Protect system with foot or panel switch.
Frame and housing material: Galvanized steel, painted with epoxy paint.
Worktop: Monolithic ceramics with marine edge, optional materials include phenolic resin, epoxy, stainless steel AISI 304, 316.

Catalog excerpts

Data sheet Fume hood Standard equipment for fume hoods: - structure entirely made of galvanized steel without the use of wood-based materials - worktop at a height of 900mm made of monolithic ceramics with a raised rim with a suspended ceramic sink 280x80mm - toughened glass window, lifted manually with counterweight, opened upwards with a lock at the height of 500 mm (max 810mm), and additionally sliding glass (right / left). The window has a system preventing the uncontrolled drop of the window - 2 electric sockets 230V 50Hz - 2 water spouts with valves on the BROEN front panel - energy-saving linear LED lighting separated from the fume hood with a glass pane - double system the back wall with exhaust slots in the upper and lower part ensuring proper extraction of vapors lighter or heavier than air without turbulence and dead zones - safety ﬂap in the ceiling ensuring decompression in the event of uncontrolled pressure increase in the working chamber - full monitoring set Schneider brand) air ﬂow velocity in the fume cupboard window compliant with the PE-EN 14175 standard - CE Declaration of Conformity: PN-EN 14175; PN-EN 14056; PN-EN 13150

Open the catalog to page 1

TECHNICAL DATA - DIMENSIONS overall dims [mm] width A working space dims (mm) width D TECHNICAL DATA recommended airﬂow [m3/h] required capacity of the ventilation system [m/s] power supply diameter of the air outlet stub [mm] water supply sewage connection diameter [mm] electrical insulation standard ventilation system double rear wall illumination installed outside the working chamber LED, class A ++, through insulating glass / from operator panel frame and housing material standard: - FM 550-A-0-E controller with a speed sensor AFS 100 in the fume hood window and the FA-0025-3 operator panel...

Open the catalog to page 2

All POL-EKO sp.k. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list