squareworx® For every eventuality: Square shoulder, slotting and chamfering milling with only one insert

 squareworx®M  square shoulder, slotting and chamfering milling cutter bodies  milling cutter bodies One for two: Square shoulder, slotting and chamfering milling operations with only one insert and two cutter bodies squareworx® is the name of the new, multifunctional milling system for precise machining with both 90° and 45° kappa approach angles and only a single insert. One insert is thus enough to perform square shoulder, slotting, face and chamfering milling operations. Each insert has four useable cutting edges with a corner radius of 0.8 mm. Cutting tool materials in five different...

© 90° approach angle tool: Precise square shoulder, slotting and face milling, embedded inserts © 45° approach angle tool: Both forward and reverse chamfering and deburring up to a cutting depth ap of 5 mm © Low storage costs thanks to the use of only one insert for two tool geometries © 4 useable cutting edges per insert, low costs per cutting edge © Clearance angle 15°, corner radius 0.8 mm © High feedrates thanks to a large number of teeth © Ease of cutting, also suitable for machines which feature less sophisticated geometry © Tool diameter 16 ... 66 mm © High removal rates, maximum efficiency ©...

© SQUAREWORX®M © SQUARE SHOULDER, SLOTTING AND CHAMFERING MILLING CUTTER BODIES © MILLING CUTTER BODIES SQUAREWORXSize M | Shoulder face and slotting milling cutters SQuAREwORx® stands out through its high application flexibility when used as shoulder face and slotting milling cutters: • Four efficiently useable cutting edges with a real corner radius of 0.8 mm • Lower power consumption; is also the ideal choice for use on machines featuring less sophisticated geometry • Efficient: Fast feedrates and high removal rates thanks to a large number of teeth • Optimum swarf conveyance thanks...

SQUAREWORXSize M | Chamfering milling cutter SQUAREWORX® stands out through its application flexibility when used as a chamfering milling cutter: • Forward and reverse chamfering • Four efficiently useable cutting edges • Efficient: Fast feedrates thanks to a large number of teeth • Optimum swarf conveyance thanks to internal coolant supply plain shank end mill bodies Gpokolm PREMIUM TOOLS. WE KNOW HOW.

© SQUAREWORX®M © SQUARE SHOULDER, SLOTTING AND CHAMFERING MILLING CUTTER BODIES © MILLING CUTTER BODIES Cutting speed (Vc in m/min) Material carbide Grade coating V major application ^ minor application T V pre-finishing V V finishing

Pokolm Frästechnik GmbH & Co. KG Adam-Opel-Straße 5 33428 Harsewinkel Germany Fon: +49 5247 9361-0 Fax: +49 5247 9361-99 [email protected] www.pokolm.com