Introduction
The document introduces the expanded range of cutting materials for SlotWoRX®HP, featuring a new square shoulder milling insert with a 0.8 mm radius. This insert is designed for finishing vertical and planar surfaces, offering a low level of drifting due to its positive angle of twist.

Specifications
The square shoulder milling insert is identified by the catalogue number 02 66 835 R08 and is part of the SlotWoRX®HP series. It features a tried and tested carbide grade with a smooth, wear-resistant coating, ensuring long tool life. The insert is suitable for machining both soft materials and hardened steels, as well as high-temperature alloys like titanium and inconel.

Machining Example
An example is provided for finishing a vertical surface of material 1.2379 (soft), demonstrating the premium surface qualities achieved with the new insert.

Technical Data
The document includes detailed technical data for various materials, including steel, stainless steel, cast iron, non-ferrous materials, high-temperature alloys, and hardened steel. Key parameters such as cutting speed (Vc), feed per tooth (fz), axial depth of cut (ap), and radial depth of cut (ae) are provided for different diameters and conditions.

Recommendations
For optimal performance, the use of cooling air is recommended, preferably supplied through the machine spindle. When machining high-temperature compounds, emulsion should be used to prevent swarf burning. Initial values are based on specific overhangs and spindle sizes, with adjustments suggested for unstable spindles.

Contact Information
Pokolm Frästechnik GmbH & Co. KG is the manufacturer, located in Harsewinkel, Germany. Contact details include email, website, phone, and fax numbers.