quadworx® xl XL-sized talent for enormous chip removal rates in square shoulder face- and high feed milling

 QUADworx®XL auch  square shoulder face / high feed bodies cutter bodies  milling cutter bodies  QUADworx  anders Wir können ®XL High-feed milling  milling cutter milling Economic size in xl: enormous chip removal rates in square shoulder face- and high feed milling uadworx®XL, the modern and proven high-feed talent is even higher performance with the new inserts for square shoulder face milling. In large diameters up to 100 mm, the milling system enables enormously fast feed rates with simultaneously extremely large cutting depths from now on aditionally for this machining mode. The indexable...

your benefit from a summary of advantages: ˨˨ One single milling cutter body fit use both as square shoulder face or high feed milling cutter thanks to the optional use of cutting insert featuring different geometries ˨˨ four cutting edges per insert for extreme economic applications ˨˨ wiper edge and large corner radius generate high accuracy surfaces, already in roughing operations ˨˨ Threaded shank end mill bodies: diam. 32 and 35 mm Shell type milling cutter bodies: diam. 40 - 100 mm ˨˨ lower costs per unit, higher manufacturing capacity ˨˨ highest chip removal rates through enormously fast...

 QUADWORX®XL  square shoulder face / high feed milling cutter bodies  milling cutter bodies QUADworx XL QUADWORX XL Size XL - diam. 32 - 100 mm • • • • four cutting edges per insert for extremely efficient operations very big metal removal rates and extremely easy cutting as a standard, every tool has internal coolant supply allows extremely high feed rates per tooth up to fz = 2.8 mm Milling cutter bodies Threaded shank end mill bodies Shell type milling cutter bodies * corner radius to be programmed 40 505 K Torx screw A > Page 7             M16X35...

Inserts for square shoulder face milling Indexable inserts Feed per tooth (fz) | d.o.c. (ap) Material Quality Coating Cutting speed (Vc in m/min) Material Quality Coating roughing pre finishing finishing roughing pre finishing finishing major application roughing pre finishing finishing minor application

 QUADWORX®XL  square shoulder face / high feed milling cutter bodies  milling cutter bodies QUADworx XL Inserts for high feed milling Indexable inserts Feed per tooth (fz) | d.o.c. (ap) Material Quality Coating P40 PVGO P25 PVGO K10 PVGO M40 PVST Cutting speed (Vc in m/min) Material Quality Coating roughing pre finishing finishing roughing pre finishing finishing roughing pre finishing finishing roughing pre finishing finishing roughing pre finishing finishing roughing pre finishing finishing Technical information available as long as stock l

Extended operation data Plunging Accessories Accessories Torx screw M 4.0 | L 9.35 | T 15 Plus | 3.6 Nm Cylindrical screws with hexagon socket | for shell-type and threaded shank adapters M16X35 cylinder screw, hexagon socket, short head M 16 | L 35 | DIN 7984 Additional screws and washers | hexagon socket set screw GWSTPS8ISK hexagon socket set screw M 8x1.25 | M8x0.75 | hexa. size 4 M 8x1.25 M8x0.75 Spanners / screwdrivers | Torx-screwdriver 15 500 P Torx-screwdriver (Torx-Plus) T 15 Plus Torque screwdrivers and accessories | Torque screwdrivers Screwdriver torque Vario®-S with window scale...

Pokolm Frästechnik GmbH & Co. KG Adam-Opel-Straße 5 33428 Harsewinkel Germany fon: +49 5247 9361-0 fax: +49 5247 9361-99 [email protected] www.pokolm.com