indexable inserts „M35 PCTC“ - made of a new carbide grade with a new coating - especially for machining titanium and high temperature alloys u u „M35“ is characterized by a very high temperature stability - Round inserts High feed inserts for Slotworx® Size M this means longer cutting edge sharpness at high temperatures u u the new CVD coating „PCTC“ with its innovative structure guarantees a high wear resistance u u with its extremely smooth surface the inserts are suitable for dry machining operations too u u the combination of carbide grade and coating stands for high cutting speeds such as high feed rates u u the sum of characteristics are qualifying the new inserts for machining titanium and high temperature alloys u u available as - round inserts r 3.5, 5, 6 and 8 mm - high feed inserts r p 1.4 mm for SLOTWORX® Size M - shoulder face milling inserts r 0.8 mm for SLOTWORX ® Size M u u comparing carbide grades and coatings Carbide grade dry machining operations with high cutting speeds wet machining up to 120 m/min, dry machining from 150 m/min machining wet or dry with high cutting speeds and high feed rates wear resistance New box with most important technical information and cutting data P 25 Comparing carbide grades and coatings Shoulder face milling inserts for Slotworx® Size M Practical test: INCONEL 718 Tool Arbor Overhang [mm] Cooling Inserts Carbide grade / coating Vc speed [m/min] Vf feed rate [mm/min] S (revolutions) [min-1] Dc [mm] fz feed per tooth [mm] ap depth of cut [mm] ae width of cut [mm] Tool life [min] Life length [m] Stock removal rate [cm3/min] similar wear patterns -

Inserts overview Round inserts Inserts Shoulder face milling insert for Slotworx® Size M Insert High feed milling insert for Slotworx® Size M Insert Pokolm Frästechnik GmbH & Co. KG Adam-Opel-Straße 5 fon: +49 5247 9361-0 33428 Harsewinkel fax: +49 5247 9361-99 Germany [email protected] www.pokolm