TOOLING SYSTEMS VHM HPC END MILLS HIGH CHIP REMOVAL RATE INCREASED HIGH FEED RATES INCREASED FEED MOTION

SOLID C ARBIDE HPC END MILLS END MILLS HPC milling In using the HPC (high performance cutting) method, you machine with the highest possible chip removal rate always. There is a unique difference between HSC (high speed cutting) an HPC (high performance cutting): in HPC, you use high cutting speeds , small side steps and extreme feed rates, any time. In using the HPC-technology, you can benefit also from the uprating of conventional milling machines through using moderate tuned feed rates and adapted cutting speeds. This results in a large chip volume per time-unit. Our solid carbide HPC-End Mills-generation...

SOLID C ARBIDE HPC END MILLS END MILLS C OPERATION DATA OPERATION DATA Seite Refurbishing of premium solid carbide end mills Material groups cutting speeds / feed per tooth / depth of cut Quickfinder – It´s easy! Don´t search, find!

0224 56 END MILLS 4 flutes for steel 4 flutes, plain shank, straight face, centre cutting, 30° right hand helix, PVTi-coated • standard series • without working depths • with chamfer | available as long as stock lasts m on request stock item, subject to confirmation

0324 56 END MILLS 4 flutes for steel 4 flutes, plain shank, straight face, centre cutting, 30° right hand helix, PVTi-coated • long series • with working depths • with chamfer major application | minor application

0370 56 END MILLS 3-4 flutes for steel | extreme milling 3-4 flutes, plain shank, straight face, centre cutting, 50° right hand helix, PVTi-coated • standard series • also available with clamping flats, from 12 mm diam. upwards compulsory • on demand: available with working depths available as long as stock lasts m on request [2 stock item, subject to confirmation 6

3-4 flutes, plain shank, straight face, centre cutting, 50° right hand helix, PVTi-coated • long series • also available with clamping flats, from 12 mm diam. upwards compulsory • on demand: available with working depths 000000 major application | minor application

0380 56 END MILLS 4 flutes for steel | extreme milling 4 flutes, plain shank, straight face, centre cutting, 50° right hand helix, PVTi-coated • standard series • with corner radius for edge stabilization • also available with clamping flats, form 12 mm diam. upwards compulsory • on demand: available with working depths available as long as stock lasts m on request [2 stock item, subject to confirmation

0390 56 END MILLS 4 flutes for steel | extreme milling 4 flutes, plain shank, straight face, centre cutting, 50° right hand helix, PVTi-coated • long series • with corner radius for edge stabilization • also available with clamping flats, form 12 mm diam. upwards compulsory • on demand: available with working depths 00000 0 major application | minor application

0504 56 END MILLS UGT 4 flutes for stainless steel 4 flutes, plain shank, centre cutting, PVST-coated • with or without clamping flats • unequal division • unequal helix angle • also available with clamping flats, form 12 mm diam. upwards compulsory available as long as stock lasts m on request [2 stock item, subject to confirmation

0514 56 END MILLS UGT 4 flutes for stainless steel 4 flutes, plain shank, centre cutting, PVST-coated • corner radius • with or without clamping flats • unequal division • unequal helix angle • also available with clamping flats, form 12 mm diam. upwards compulsory 0000000000 major application | minor application

0384 56 END MILLS HGT 4 flutes for high performance milling 4 flutes, plain shank, straight face, centre cutting, 50° right hand helix, PVTi-coated • standard series • corner radius • unequal division • also available with clamping flats, form 12 mm diam. upwards compulsory • on demand: available with working depths available as long as stock lasts m on request [2 stock item, subject to confirmation

REFURBISHING OF PREMIUM SOLID C ARBIDE END MILLS Premium solid ca carbide tools live longer: e lo longer: ... in more ways than one! ways a ! The Voha-Tosec service team offers within this WorkoutVoha-Tosec se T c service program for existing, already used Solid carbide tooling a for wide variety of services: u u u u reproduction reproduction u tion o refurbi refurbishing furbi urb bishing modification modifi recoating We check, classify and mark ever y sing tool individually, k eve sing every single gle in order to ensure, that ever y customer receives his own every customer e usto tom tools back....

These speed and feed values are approximate. Customer-specific factors such as input power, machine stability, tool overhang, etc. are not taken into account. In order to guarantee optimum and economic cutting conditions with our tools, please ask our office or one of our application engineers.

CUTTING SPEEDS FOR SOLID CARBIDE END MILLS roughing These speed and feed values are approximate. Customer-specific factors such as input power, machine stability, tool overhang, etc. are not taken into account. In order to guarantee optimum and economic cutting conditions with our tools, please ask our office or one of our application engineers.

0504 / 0514 Stainless steel Stainless steel feed per tooth f feed per tooth fz speed Vc=80 m/min speed Vc=40 m/min These speed and feed values are approximate. Customer-specific factors such as input power, machine stability, tool overhang, etc. are not taken into account. In order to guarantee optimum and economic cutting conditions with our tools, please ask our office or one of our application engineers.

SPEED/FEED PER TOOTH/ DEPTH OF CUT HGT- end mills for pocket- and slot milling High nickel alloys (inconel) 718 etc.: feed per tooth fz speed Vc= 25 m/min feed per tooth fz speed Vc= 15 m/min Stainless steel 1.4401, 1.4571, 1.4404 (Cr-Ni-Mo) etc.: Stainless steel 1.4301, 1.4541, 1.4307 (Cr-Ni) etc.: feed per tooth fz speed Vc= 40 m/min feed per tooth fz speed Vc= 80 m/min These speed and feed values are approximate. Customer-specific factors such as input power, machine stability, tool overhang, etc. are not taken into account. In order to guarantee optimum and economic cutting conditions with...