Hard machining of steel grades up to 65 HRC
16Pages

{{requestButtons}}

Catalog excerpts

Hard machining of steel grades up to 65 HRC - 1

HARD MACHINING OF STEEL GRADES UP TO 65 HRC High-efficiency carbide cutters with ultra-high performance in hard machining applications

Open the catalog to page 1
Hard machining of steel grades up to 65 HRC - 2

 END Title MILLS FOR STEEL UP TO 65 HRC  SOLID CARBIDE END MILLS Highly efficient machining of hardened steel grades - outstanding durability, high precision new solid for POKOLM'sapplication.carbide milling cuttersnew use with materials up to 65 HRC have set completely standards in this cutting The specially designed, tangential shaft transition confers superior bending fracture strength compared with conventional models. The entire product line of ball and angular radius cutters is distinguished by extreme durability, high precision, and outstanding quality of finish. Diameters from 0.2...

Open the catalog to page 2
Hard machining of steel grades up to 65 HRC - 3

Pokolm's new Solid carbide end mills up to 65 HRC - Clear winners in direct benchmark test Benchmark testing in a lab setting POKOLM's innovative solid carbide ball nose cutters for use with materials of up to hardness of 65 HRC had to face up to competitive products designed for cutting similar materials in a head-to-head challenge. All test candidates were used to machine geometries from 1.2379 60+2 HRC in identical test set-ups. All tools had a cutting diameter of 2.0 mm and a machining depth of 12 mm. Electric spindle Coolant Coating POKOLM milling cutter Tool wear and dimensional...

Open the catalog to page 3
Hard machining of steel grades up to 65 HRC - 4

 SOLID CARBIDE END MILLS End mills for steel up to 65 HRC Ball nose end mills | 2 flutes 2 flutes, plain shank, right hand helix angle Effective working length at X° of draft Ball nose end mills center cutting end mill ball nose with and without clearance between shank and flute up to 20 x d high precision: r = +/- 0,005 ; d1 < Ø 6 = 0/- 0,015; d1 > Ø 6 = 0/- 0,02 UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix

Open the catalog to page 4
Hard machining of steel grades up to 65 HRC - 5

Effective working length at X° of draft Ball nose end mills  Object 437471  Object 437470  Solid carbide end mills with AT | short | long B2HA-020-100-150-01 UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix

Open the catalog to page 5
Hard machining of steel grades up to 65 HRC - 6

Effective working length at X° of draft Ball nose end mills  SOLID CARBIDE END MILLS UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix

Open the catalog to page 6
Hard machining of steel grades up to 65 HRC - 7

Effective working length at X° of draft Ball nose end mills  Object 437471  Object 437470  Solid carbide end mills UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix

Open the catalog to page 7
Hard machining of steel grades up to 65 HRC - 8

 SOLID CARBIDE END MILLS Cutting rates | Application data Ball nose cutters - copying 3D Hardened steel d1 [mm]

Open the catalog to page 8
Hard machining of steel grades up to 65 HRC - 9

 Object 437472  Object 437470  Solid carbide end mills End mills for steel up to 65 HRC Toric / Corner radius end mills | 2 flutes 2 flutes, plain shank, right hand helix angle Effective working length at X° of draft Corner radius end mills center cutting end mill with and without clearance between shank and flute up to 20 x d high precision: r = +/- 0,005 ; d1 < Ø 6 = 0/- 0,015; d1 > Ø 6 = 0/- 0,02 UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC...

Open the catalog to page 9
Hard machining of steel grades up to 65 HRC - 10

Effective working length at X° of draft Corner radius end mills  SOLID CARBIDE END MILLS UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix

Open the catalog to page 10
Hard machining of steel grades up to 65 HRC - 11

Effective working length at X° of draft Corner radius end mills Cutting specification UMGC PVTix UMGC PVTix UMGC PVTix

Open the catalog to page 11
Hard machining of steel grades up to 65 HRC - 12

Effective working length at X° of draft Corner radius end mills  SOLID CARBIDE END MILLS UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix

Open the catalog to page 12
Hard machining of steel grades up to 65 HRC - 13

Effective working length at X° of draft Corner radius end mills Cutting specification UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix UMGC PVTix

Open the catalog to page 13
Hard machining of steel grades up to 65 HRC - 14

0 END MILLS FOR STEEL UP TO 65 HRC 0 SOLID CARBIDE END MILLS Cutting rates | Application data

Open the catalog to page 14
Hard machining of steel grades up to 65 HRC - 15

User report FROM PRACTICE TO PRACTICE JOB DESCRIPTION: unning two factories in the city of Siegen, the Fuchs Schraubenwerk company is renowned for its sophisticated products such as formed parts, specialpurpose bolts, high-tension bolts, and steel construction bolts. The roots of the owner-operated, long-going firm with about 200 employees go way back into the early 19th century. ust a few years ago, the company's own tool production was upgraded with an Okuma-made machining centre, type "Genos M460R". This is used to fabricate lines of punching and forming tools made of tempered HSS steel...

Open the catalog to page 15
Hard machining of steel grades up to 65 HRC - 16

Pokolm Frästechnik GmbH & Co. KG Adam-Opel-Straße 5 33428 Harsewinkel Germany fon: +49 5247 9361-0 fax: +49 5247 9361-99 info@pokolm.com www.pokolm.com

Open the catalog to page 16

All POKOLM Frästechnik GmbH & Co. KG catalogs and technical brochures

  1. Trigaworx

    6 Pages

  2. SPINWORX®

    20 Pages

  3. DR12

    2 Pages

  4. Smashing

    2 Pages

  5. Slotworx®HP

    2 Pages

  6. Slotworx VF

    3 Pages

  7. Slotworx-HP

    5 Pages

  8. Quadworx-XL

    7 Pages

  9. Pyramid

    2 Pages

  10. MIRROWORX®

    7 Pages

  11. HPC

    24 Pages

  12. Fourworx

    5 Pages

  13. forgefix P

    2 Pages

  14. CVD

    4 Pages

  15. FOURWORX®

    8 Pages

  16. SQUAREWORX®

    8 Pages

  17. SPINWORX ®

    28 Pages

  18. Finworx®

    8 Pages