COPY MILLING CUTTERS SPINWORX® inserts for SAH machining, radius 6 mm Optimized cutting edge and chip groove for the greatest possible stability and low cutting forces Two clearance angle versions: 11° (DR12-8B3) or 15° (DR12-8B7, preferred for titanium alloys) The extremely tough and wear-proof M35 quality guarantees especially high cutting-edge stability The 7 ^m thick CVD coating ensures high temperature and wear resistance Preferably machine stainless steel with MQL or dry with high cutting speeds, wet machining max. 140m/min When machining titanium alloys or high temperature alloys, emulsion is required as a coolant From September 2016 also for systems DR07, DR10 und DR16 Machining material Inconel 718 Inserts Clear winner when machining aircraft components made of Inconel 718: The entire roughening and finishing time with the DR12-8B3 cutting insert from the SPINWORX® system is a mere 37 hours compared to 74 hours with a conventional tool. Moreover, with SPINWORX® only 7 machine stops are needed to replace the cutting insert compared to 74 stops with standard tools. Under ideal conditions, up to 5 hours can be achieved with the new DR12-8B3 insert! Cpokolm

© SPINWORX® © COPY MILLING CUTTERS * major application minor application $f§j Gpokolm Bjaft PRE MIU MTOOLS. WE KNOW HOW. Pokolm Frastechnik GmbH & Co. KG Adam-Opel-StraBe 5 fon: +49 5247 9361-0 [email protected]