1. Catalogs
  2. PNEUMAX
  3. MEMBRANE DRYER - SERIES Airplus

MEMBRANE DRYER - SERIES Airplus

MEMBRANE DRYER - SERIES Airplus

MEMBRANE DRYER - SERIES Airplus

Product catalog summary
Overview: The document provides technical specifications and operational details for the Airplus Membrane Dryer series by Pneumax S.p.A. These dryers are designed for air treatment, specifically for reducing the pressure dew point of compressed air using a hollow fiber membrane system.
Specifications:
  • Available in two sizes with G3/8” and G1/2” connections.
  • Maximum inlet pressure of 13 bar and flow rate up to 230 nl/min.
  • Compact design with low noise level (<45 dB(A)).
  • Requires a 5µ filter and purifier before use.
Technical Characteristics:
  • Body and connections made of aluminum.
  • Operational temperature range: +2 °C to +60 °C.
  • Maximum solid particle size: 1 µm; max oil residue: 0.01 mg/m³.
Operational Characteristics:
  • Compressed air consumption for regeneration at 6.3 bar is 20 nl/min.
  • Weights: 795 g for Size 2 and 920 g for Size 3.
Operating Principle:
  • Compressed air enters the dryer, flows through the membrane, and is dried by the regeneration air which absorbs moisture.
  • Humid regeneration air is exhausted, and dried air exits the dryer.
Characteristic Curves:
  • Graphs illustrate the relationship between outlet flow rate and dew point at various inlet pressures (4, 6.3, and 8 bar).
  • Higher inlet pressures improve drying efficiency but increase regeneration air usage.
Dimensions:
  • Model P172BeSC: Dimensions include B1: 62 mm, L1: 357 mm.
  • Model P173BeSC: Dimensions include B1: 73 mm, L1: 368 mm.
Contact Information: Pneumax S.p.A., Via Cascina Barbellina, 10, 24050 Lurano (BG) - Italy. Phone: +39 035 41 92 777, Email: [email protected]
See more

Catalog excerpts

MEMBRANE DRYER - SERIES Airplus-1

SERIES Airplus MEMBRANE DRYER

 Open the catalog to page 1
MEMBRANE DRYER - SERIES Airplus-3

Air service units Series Airplus ► Available in 2 sizes with 3/8” and 1/2” connections ► Pressure dew point reduction as a function of flow rate ► Reliable drying performance ensured by the hollow fiber membrane system ► Flow rate up to 230 Nl/min Always use a 5p filter and purifier before the dryer. Operational characteristics Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice 2 |

 Open the catalog to page 3
MEMBRANE DRYER - SERIES Airplus-4

Membrane dryer Operating principle A. Compressed air enters the body of the dryer and, through the pipe located at the center of the membrane (1), flows downwards. At the bottom, the flow direction is inverted, and the air rises, passing through the membrane. B. From the nozzle (2), a quantity of dried compressed air (called regeneration air) is directed towards the outside of the membrane. Thanks to the membrane’s structure, the regeneration air is evenly distributed. C. As a result, two airflows with different humidity levels move in opposite directions through the device, separated only by...

 Open the catalog to page 4
MEMBRANE DRYER - SERIES Airplus-5

Series Airplus Characteristic curves • Atmospheric dew point • Incoming air with a dew point of 25°C Outlet air dew point at atmospheric pressure (°C) Outlet flow rate (Nl/min) A: Incoming air with a dew point of 45°C B: Incoming air with a dew point of 35°C C: Incoming air with a dew point of 25°C D: Incoming air with a dew point of 15°C A: Incoming air with a dew point of 45°C B: Incoming air with a dew point of 35°C C: Incoming air with a dew point of 25°C D: Incoming air with a dew point of 15°C 75 Outlet flow rate (Nl/min) 150 Outlet flow rate (Nl/min) A: Incoming air with a dew point of...

 Open the catalog to page 5
MEMBRANE DRYER - SERIES Airplus-6

2 | 4 Overall dimensions and technical information are provided solely for informative purposes and may be modified without notic

 Open the catalog to page 6
MEMBRANE DRYER - SERIES Airplus-7

pnEummCPNEUMAX S.p.A. Via Cascina Barbellina, 10 24050 Lurano (BG) - Italy P. +39 035 41 92 777 [email protected]

 Open the catalog to page 7

All PNEUMAX catalogs and technical brochures

  1. PNEUMAX ACADEMY

    12  Pages

  2. SALES PROGRAM

    170  Pages

  3. LT LINE

    36  Pages

  4. ATEX OVERVIEW

    28  Pages

  5. VOLUME BOOSTER

    19  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.