*mydirectindustry

Catalogs
PNEUMAX
ATEX OVERVIEW

ATEX OVERVIEW

Product catalog summary

ATEX Overview
Pneumax offers components suitable for explosive atmospheres under Directive 2014/34/UE (ATEX), which sets harmonized requirements for equipment in dust or gas hazard environments.

ATEX Directive 2014/34/EU
The directive categorizes equipment into Group I for mines and Group II for surface industries, with further categories based on protection levels.

Equipment Groups and Categories

Group I: M1 (very high protection), M2 (high protection)
Group II: Category 1 (very high protection), Category 2 (high protection), Category 3 (normal protection)

Gas and Dust Sub-Groups
Gases are divided into IIA, IIB, and IIC, with IIC being the most dangerous. Dusts are categorized into IIIA (fiber), IIIB (non-conductive), and IIIC (conductive).

ATEX Marking and Zones
Products must have CE marking and specific explosive protection markings. Hazardous locations are classified into zones based on explosive atmosphere frequency and duration.

Temperature Classes
Equipment is classified by maximum permissible surface temperature.

Valves and Solenoid Valves
Pneumax offers various valve series with specific markings, temperature ranges, and connection types, designed for different operational conditions.

Process Automation Technology
Includes valves suitable for high and low temperatures, with specific markings and connection types.

Conclusion
The document details Pneumax's ATEX-compliant components, emphasizing safety and compliance for explosive atmospheres.

Solenoid Valves

Series X7_: Solenoid valves with coil XME 2GD, XMB, or XMC 3GD, marked for II 2G Ex h IIB T4 Gb X and II 2D Ex h IIIC T135°C Db X, temperature range -5°C to +40°C.
Series 514/N: Valves without coil, marked for II 2G Ex h IIB T5 Gb X and II 2D Ex h IIIC T96°C Db X, temperature range -10°C to +50°C.
Series 515 - 517: Solenoid valves with coil XME 2GD, XMHC 2GD Ex ia, and XMH4/H6 2GD Ex ia, marked for II 2G Ex h IIC T4 Gb X and II 2D Ex h IIIC T135°C Db X, temperature range -30°C to +50°C.

Manifolds

Series 2400 - 2600: Solenoid valve manifolds marked for II 3G Ex nA IIC T6 Gc IP65 and II 3D Ex tc IIIC T=85°C Dc IP65, temperature range -5°C to +50°C.

Air Treatment Components

Series 1700: Filters, coalescing filters, pressure regulators, and lubricators, marked for II 2G Ex h IIB T5 Gb X and II 2D Ex h IIIB T90°C Db X, temperature range -5°C to +50°C.

Accessories

Steel Line Series: High and low-temperature accessories marked for II 2G Ex h IIC T3 Gb X and II 2D Ex h IIIC T180°C Db X, temperature range -10°C to +150°C.

Key Points

All components are ATEX certified for safety in explosive atmospheres.
Temperature ranges and connection types vary across series and part numbers.
Technical information is subject to change without notice.

Specifications
Components include shut-off valves, filters, coalescing filters, lubricators, filter regulators, pressure boosters, and pneumatic cylinders, each detailed with part number, marking, temperature range, version, size, and connection type.

ATEX Certification
Components are ATEX-ready, ensuring compliance with safety standards for explosive atmospheres.

Temperature and Connection Details
Components operate within specific temperature ranges, with NPT and G thread connections.

Conclusion
The document guides the selection of pneumatic components based on technical specifications, ATEX certification, and operational parameters, ensuring safety and efficiency in industrial applications.

Product Variants
Includes ECOLIGHT, ECOFLAT, SERIES 1500, and ECOMPACT, with features like magnetic or non-magnetic versions, and options for low-temperature environments.

Applications
Components are designed for automotive, clamping, pivoting, handling, and locating applications.

Catalog excerpts

OVERVIEW EN Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice

Open the catalog to page 1

ATEX Overview ATEX Overview Components for explosive atmosphere Pneumax is offering a range of components usable in potentially explosive atmosphere and classified in different protection categories according to Directive 2014/34/UE, also known as ATEX. Overall dimensions and technical information are provided solely for informative purposes and may be modified without notice

Open the catalog to page 3

ATEX Overview Directive ATEX 2014/34/EU (previously ATEX 94/9/EC) provides for harmonised requirements and conformity assessment procedures for electrical and non-electrical equipment, intended for use in environments which are potentially explosive due to dust or gas hazards, and protective systems. Safety devices intended for use outside explosive atmospheres, which are required for or contribute to the safe functioning of equipment or protective systems with respect to risks of explosion are also included. ATEX Directive divides equipment into groups and categories as shown into table below....

Open the catalog to page 4

ATEX Overview Directive 2014/34/EU (Manufacturer Directive) applies to equipment and protective systems (group, category, assessment procedures, marking) whereas ATEX Directive 99/92/CE (User Directive) provides for a classification of the places where explosive atmospheres may occur Zone 0 Zone 1 Zone 2 (zoning) and define protection level of the equipment and protective systems (groups and categories) shall be used in each zone. Hazardous locations are classified, by the User, in zones based on frequency and duration of the occurrence of explosive atmosphere. A place in which an explosive atmosphere...

Open the catalog to page 5

ATEX Overview Air distribution Valves and solenoid valves Air distribution Valves and solenoid valves Valves and solenoid valves with spools ATEX ON REQUEST SERIES 104 part no. X104_ - Valves Pneumatic, mechanic and manual Pneumatic, mechanic and manual SERIES 105 part no. X105_ - Valves part no. X105_2640_ - Handle with valve Pneumatic, mechanic and manual Pneumatic, mechanic and manual Pneumatic, mechanic and manual SERIES 200 part no. X2_ - Valves part no. X2_10_ - Valves with pedal Marking II 3G Ex h IIB T5 Gc X II 3D Ex h IIIC T100°C Dc X ATEX ON REQUEST SERIES T200 part no. X2T8_ | X2T4_...

Open the catalog to page 6

ATEX Overview Air distribution Valves and solenoid valves SERIES 800 (continue) part no. X8_ B_ | X8_ C_ - Solenoid valves with coil XMB or XMC 3GD Marking part no. X805_ | X808_ | X818_ - Solenoid valves with electric pilot XN3_ 15mm 3GD Marking part no. X824_ | X828_ - Solenoid valves without coil Solenoid, pneumatic, mechanic and manual SERIES 400 part no. X4_ M2 - Solenoid valves without coil Marking Solenoid, pneumatic, mechanic and manual part no. X4_ X_ - Solenoid valves with coil XME 2GD Marking Solenoid, pneumatic, mechanic and manual part no. X4_ B_ | X4_ C_ | X4_ M_ - Solenoid valves...

Open the catalog to page 7

ATEX Overview Air distribution Valves and solenoid valves Valves and solenoid valves with spool ATEX READY PROCESS AUTOMATION TECHNOLOGY STAINLESS STEEL VALVES part no. SS11_ | SS12_ | SS14_ | SS34_ - H - High temperature Marking Solenoid, pneumatic, mechanic and manual ATEX READY Solenoid, pneumatic, mechanic and manual PROCESS AUTOMATION TECHNOLOGY ALUMINIUM VALVES SERIES part no. SA11_ | SA12_ | SA14_ | SA38_ Marking Pneumatic, mechanic and manual Direct operated solenoid valves ATEX ON REQUEST SERIES 300 part no. XN3_ - Direct operated solenoid valves M SERIES (MECHANICS) part no. XM2_ ,...

Open the catalog to page 8

ATEX Overview Air distribution Valves and solenoid valves CNOMO SERIES (continue) part no. XM3P_ , XM3R_ | XM4P_ , XM4R_ | XM5P_ , XM5R_ - Solenoid valves with coil XMB or XMC 3GD Marking Valves and solenoid valves poppet system ATEX ON REQUEST SERIES 700 part no. X70532_ | X77_3211_ - Valves part no. X7_M2 - Solenoid valves without coil Marking II 2G Ex h IIB T6 Gb X II 2D Ex h IIIC T70°C Db X part no. X7_ X_ - Solenoid valves with coil XME 2GD Marking part no. X7_ B_ | X7_ C_ - Solenoid valves with coil XME 2GD XMB or XMC 3GD ATEX READY PROCESS AUTOMATION TECHNOLOGY ALUMINIUM VALVES SERIES...

Open the catalog to page 9

ATEX Overview Air distribution Valves and solenoid valves SERIES T514 part no. X5T4 - Valves and solenoid valves without coil Marking II 2G Ex h IIB T5 Gb X II 2D Ex h IIIC T96°C Db X Pneum. or Sol. - Differential Pneum. or Sol. - Spring Pneum. or Sol. - Pneumatic Solenoid - Differential Solenoid - Spring Solenoid - Pneumatic Solenoid - Differential Solenoid - Spring Solenoid - Pneumatic Pneum. or Sol. - Differential Pneum. or Sol. - Spring Pneum. or Sol. - Pneumatic Solenoid - Differential Solenoid - Spring Solenoid - Pneumatic part no. X5T4 - Solenoid valves with coil XME 2GD Marking II 2G...

Open the catalog to page 10

ATEX Overview SERIES 515 - 517 (continue) part no. X515 | X517 - Solenoid valves with coil XMB or XMC 3GD Marking II 3G Ex h IIC T4 Gc X II 3D Ex h IIIC T120°C Dc X IP65 Solenoid - Differential Solenoid - Spring Solenoid - Pneumatic Valves and solenoid valves ISO5599/1 ATEX ON REQUEST SERIES 1000 part no. X10_16_ | X10_18_ | X10_19_ - Valves Marking II 2G Ex h IIC T5 Gb X II 2D Ex h IIIC T100°C Db X Solenoid, Pneumatic. part no. X1001_ , X1051_ | X1002_ , X1052_ - Solenoid valves without coil Marking Solenoid, Pneumatic. part no. X1001_ , X1051_ | X1002_ , X1052_ - Solenoid valves with coil XME...

Open the catalog to page 11

ATEX Overview Air distribution Valves and solenoid valves manifold Aluminum process automation technology accessories ATEX READY ALUMINUM PROCESS AUTOMATION TECHNOLOGY SERIES part no. A6_ - H - Accessories Marking Valves and solenoid valves manifold Valves and solenoid valves manifold VDMA ATEX ON REQUEST SERIES 2400 VDMA part no. 2400_ - Solenoid valves manifold SERIES 2600 VDMA part no. 2600_ - Solenoid valves manifold Marking Solenoid valves manifold ISO15407-2 ATEX READY SERIES 2700 part no. 2700_ - Solenoid valves manifold Marking Solenoid valves manifold ATEX READY SERIES 2200 OPTYMA-S...

Open the catalog to page 12

ATEX Overview Air Treatment Modular FRL ATEX ON REQUEST SERIES 1700 part no. X17001... - Filter Marking Metal body Metal body part no. X17008... - Coalescing filter part no. X17002… - X17022… - Pressure regulator Marking Metal body part no. X170B2... - X170M2… - Manifold pressure regulators Marking Metal body Metal body Metal body part no. X17004… - Filter regulator part no. X17110M2 - X17120 - Progressive start-up valve Marking Metal body Metal body part no. X17030… - Shut-off valve part no. X171S2… - High sensitive air pressure regulator Marking Metal body part no. X17202… - X17222 - Pressure...

Open the catalog to page 13

ATEX OVERVIEW

ATEX OVERVIEW

Catalog excerpts

All PNEUMAX catalogs and technical brochures