Stainless Steel Filter Housings PCS S E R I E S P CS S E R I E S P R E M I U M F I LT R AT I O N 304 Stainless Steel Housings for Challenging Applications Critical applications and hostile environments demand premium grade products. Global leaders rely on PCS Series 304SS filter housings for their unmatched quality, durability and reliability in tough applications. Power plants, paper mills, refineries, and petrochemical installations are a few examples of the challenging environments that rely on PCS Series filters for lasting protection. D E S C R I PTI O N A series of 4’’ and 6’’, “L” type housings completely fabricated of 304 stainless steel for gas flows of 200 to 950 scfm at 100 psig (higher flow rates at 250 psig). Designed specifically for use with Pneumatic Products high performance air and gas filter cartridges. FE ATU R E S A N D B E N E F I T S • imple top-loading design for easy filter cartridge access. No S U LT I M AT E PR OT E CT I O N Hand-crafted from quality type 304 stainless steel, PCS Filters need to disconnect drain valve or other tubing when changing are fabricated to achieve system purification and provide superior protection against corrosion. Design flexibility allows for use in • tainless steel V-band locks cover to housing with captive seal S for removal and attachment without tools. • tainless steel construction for longer housing life under S adverse conditions. • -ring seals avoid leakage paths associated with tie-rod O design switch permit contamination downstream. • ow housing DP saves dollars (a 1-psi pressure drop costs, on L average, $78 per year per 100 scfm at 7¢ per kwh). • ilicone cover seals permit use downstream of a heatS reactivated or heaterless dryer. • /4” NPT drain and vent ports enable housings to be used 1 without expensive after-purchase modification. • ingle cartridge design for easy, rapid filter change-out. S coalescing or particulate duty applications to 300 psig. Simplicity, user friendliness, and ease of maintenance make them the filter of choice in unforgiving environments. APPL I CAT I O N S For use as coalescing or particulate filter housing for compressed air to 300 psig. May be used alone or as pre- and after-filters for a Pneumatic Products re

Product Specifications *SCFM and PSID at 100 psig and 250 psig, 100°F Performance data per CAGI Standard ADF 200 for Dual-Tower Regenerative Desiccant Compressed Air Dryer. Rating conditions are 100°F (37.8°C) inlet 100 psig (6.9 bar) inlet pressure, 100% relative humidity, 100°F (37.8°C) ambient temperature. Consult factory for sizing assistance. Larger models available. SPX FLOW Inc. | 4647 SW 40th Avenue | Ocala, Florida 34474-5788 U.S.A. P: (352) 873-5793 F: (352) 873-5770 E: [email protected] www.spxflow.com/pneumatic-products SPX FLOW, Inc. reserves the right to incorporate our latest...