Mu lti - Ca r tr idge Fi lter Hous i ng s P C C S E R I E S CA R B O N S T E E L FA B R I CATE D CA R B O N S T E E L H OU S I N G S F O R LA R G E F LOW A P P LI CAT I ON S Facilities with high capacity air systems demand quality filtration that provides long life and critical protection. PCC Series large flow filters meet the challenge and provide contaminant protection for the premium grade desiccants used in our dryers and the contaminant sensitive applications within your plant. D E S C R I PTI O N A series of 8”-20” - diameter free-standing “L” type housings fabricated of carbon steel for gas flows of 1,200 to 15,000 SCFM at 100 psig (higher flow rates at 300 psig). Designed specifically for use with Pneumatic Products high performance air and gas filter cartridges. FE ATU R E S A N D B E N E F I T S • imple top-loading design for easy filter cartridge access. No S PR E C I S I O N FAB R I CAT I O N Craftsmen transform high-grade carbon steel plate into ASME need to disconnect drain valve or other tubing when changing approved pressure vessels rated to 300 psig. Global leaders rely on these hand crafted filter housings for the rugged durability required • ow housing constructed from carbon steel in accordance L with ASME code. All stainless steel construction available. • lement O-ring seals avoid leakage paths associated with tieE rod designs which permit contamination downstream. by applications such as power plants, paper mills, refineries, and petrochemical installations. PCC Series housings are shot blasted then receive corrosion-resistant primer and enamel top coat finish for lasting protection. • ifting lug on housing cover and simple bolt closure for ease L of filter change-out. • /2” NPT drain and vent ports enable housings to be used 1 without after-purchase modifications. • /4” NPT inlet and outlet pressure gauge taps accommodate 1 preventive maintenance for aid in trouble-shooting. • ultiple cartridge design accommodates high flow rates M • xterior and interior painted finish for optimum corrosion E protection. Typical gases include air, nitrogen, helium and argon. Contact Pneumatic Products for filter compatibility. APPL I CAT I O N S For use in the separation or filtration of liquid oil & water (coalescing), hydrocarbon vapors or particulates in compressed air or other gases. May be used alone or as pre- or after-filters for a Pneumatic Products regen

Product Specifications *SCFM and PSID at 100 psig and 250 psig, 100°F Performance data per CAGI Standard ADF 200 for Dual-Tower Regenerative Desiccant Compressed Air Dryer. Rating conditions are 100°F (37.8°C) inlet 100 psig (6.9 bar) inlet pressure, 100% relative humidity, 100°F (37.8°C) ambient temperature. Consult factory for sizing assistance. Larger models available. SPX FLOW Inc. | 4647 SW 40th Avenue | Ocala, Florida 34474-5788 U.S.A. P: (352) 873-5793 F: (352) 873-5770 E: [email protected] www.spxflow.com/pneumatic-products SPX FLOW, Inc. reserves the right to incorporate our latest...