DOSATRON SEMI AUTOMATIC DOSING UNIT

Product catalog summary

Overview
The document describes the DOSATRON Table-Top Semi-Automatic Dosing Unit, designed for filling, capping, and labelling tasks. It is suitable for dense and semi-dense products such as sauces, oils, honey, pâtés, jams, and creams, and can be used with both glass and plastic containers.

General Features
The dosing unit is electronic and volumetric, with adjustable dosing from 50 to 300 c.c. It is constructed from stainless steel AISI 304 with Teflon seals. The control panel allows for setting and storing dosage values, regulating suction and dosing speed, and setting suction time for different products without additional splitters.

Technical Features

Production capacity: 360 pieces per hour (dependent on product features, dosing range, and operator skill).
Electrical power: 220 V mono-phase.
Installed power: 0.75 Kw.
Dimensions of dosing unit (excluding hopper and base): Width 250 mm, Length 800 mm, Height 500 mm.
Weight of dosing unit: 125 Kg.
Dimensions of dosing unit with support (excluding hopper): Width 800 mm, Length 950 mm, Height 500 mm.
Weight of dosing unit with support: 135 Kg.
Dimensions of control box: Width 500 mm, Length 300 mm, Height 160 mm.

Contact Information
PMR System Group srl, Via Bertacciola, 41, 20813 Bovisio Masciago (MB), Italy. Phone: +39 0362 594502, Fax: +39 0362 594485, Email: [email protected], Website: www.pmr.it

Catalog excerpts

FILLING CAPPING LABELLING since 1971 TABLE-TOP SEMI AUTOMATIC DOSING UNIT Control panel for setting the dosage values, with the possibility of storing the different formats. Dosing nozzle, customized according to the product and the size of the bottle.

Open the catalog to page 1

GENERAL FEATURES Electronic volumetric dosing units , suitable for dense and semi-dense products such as sauces, oil, honey, pates, jams, creams and similar. Suitable for glass and plastic containers. adjustable from 50 to 300 c.c., in stainless steel AISI 304 with Teflon seals. Dosing nozzles, for dense and semi-dense products. Dosing value can be set directly from the control panel with the possibility to save the different format. From the panel, it is possible to regulate the suction and dosing speed . Setting and storing of the suction time in order to operate on different products without...

Open the catalog to page 2

All PMR System Group catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list