TRANSMISSIONS TRANSMISSIONS for electrical tractorsand forklift trucks for electrical tractorsand forklift trucks >

www.pmp-promec.it The new leader in transmission sector >

The transmission for fork lifts were developed after a complete analysisof the market taking in consideration the new technologies that were introduced and the real needs of the operators. The fast motors, the saving of energy, the low noise level, the reliability,the low maintenance costs, these are the key ideas of our new product range.The experience of our engineering team is one of the strong points of PMP PRO-MEC and allows the customer to choose the better responsefor his needs. In fact PMP offer technologically advanced engineering tools and, more importantly, strong and innovative ideas.Our...

The field of application of our transmission is the most ample one forany unit with a speed not superior to 30 km/h and a maximum load of 8,5. Our line of products is the only one that can cover a range of forklifts with a lifting capacity from 1,5 ton to 8 ton, with twin motor application and electronic differential and with single motor and mechanical differential. The PMS gearboxes, given this name thanks to their peculiar shape,with the axle of the motor and of the wheel in different positions, guarantee a high adaptability to customer products since its possible to install them at different...

The PMA version were studied to complete the range and can beapplied on forklift with diesel or electrical engine in a longitudinal position. On this line you can still find an hydraulic braking system with the automatic disk disengage system (patented) but considering their layout the disk chamber is in common with main gearbox. These transmissions have traced the road of the future in the field ofthe handling where the matter of the cost and of the performances must be solved with a single unique solution. This catalogue summaries the range of the products available butgiven the high flexibility...

The low noise level is an indication that the transmission has beendeveloped according to the correct standards, that the production cycle is a reliable one and that the quality standards are high ones. This characteristic of the PMP products is well know on the marketsince is prevalent application on electrical forklifts and it is highly appreciated by the final users. Since on the PMP transmission the motor axle is different from wheel one and their structure is independent, the motor and the gearbox can work independently without any functional problem, even in presence of flexions or vibrations....

It is possible to choose from different configurations for the brake, inaccordance to the application: - p - n positive brake, with hydraulic service brake and mechanical parkingbrake with lever; combined brake with hydraulic service brake and parking brakeactivated by coils and hydraulic actuation. It is very important to notice that is possible to change from one brake to the other only with substitution of the brake lever. > The single motor gearboxes PMS/PMR can be used and adapted with: DC electrical motor (serial or separated excitation); AC electrical motor; Hydraulic motor.The PMS HS...

Replacing of brake disks or doing maintenance on the brake requiresthat only the brake cartridge is disassembled, and not the whole reduction gear (the correct procedure is described in the User, installation and maintenance manualӔ) > For a correct choice of the gearbox is necessary that its technicalcharacteristics are equal if not superior to the ones requested by forkliftthat is going to use it. We advise to check carefully the following data: The power of the motor and the ratio of reduction in relation withthe max speed requested on a flat surface, unloaded and loaded; The power of the...