PML701-RO
3Pages

PML 701-RO High impedance passive probe Features:  2.5 mm diameter tip  Coaxial design  Interchangeable spring contact tip  IC contacting system for 0.5 to 1.27 mm pitch The PML passive probe family sets new standards in high performance probing. The compact design with only 2.5 mm housing diameter at the probe tip is ideal for measurements of SMT components. It provides a much better visibility over of the device under test as conventional 5 mm probe housing designs. A true PMK GmbH feature the exchangeable probe tip is also available for the PML series. The gold plated spring contact or the rigid tip are only 0.5 mm in diameter. The tip replacement is easy and gives the engineer the best choice. Particularly for HF measurements on IC´s, a short as possible ground connection is recommendable. Due to long ground leads most conventional adaptations bring additional inductance and resonances into the measurement which will result in false or inaccurate readings. The innovative IC contacting system of the PML with 5 different IC adapters from 0.5 to 1.27 mm pitch in combination with the ground blade and IC ground copper pad is the ideal solution for short-circuit-safe, reproducible, and authentic measurements. These great advantages and over 30 accessories parts for the new PML probe series will offer various configuration to solve most adaptation desires. Thank you for your interest in our product!

This datasheet supersedes all previously published material. Specifications that are defined typical are not guaranteed and are published as general information to the user. The instrument should have warmed up for at least 20 minutes and the environmental conditions must not exceed the specified limits of the probe. Note that specifications are subject to change without notice. Electrical Specifications Attenuation Ratio System Bandwidth (1) System Risetime Maximum Rated Input Voltage (2) Pollution Degree Electrical Characteristics 39 pF + scope (typical) 1 MΩ AC / DC Input Capacitance...

Environmental Specifications Altitude operating non-operating Temperature Range operating non-operating Maximum Relative Humidity operating Scope of Delivery PML 701-RO ■ Probe ■ Ground Blade 2.5 ■ Ground Lead 15 cm ■ Ground Spring 2.5 ■ IC-Caps 0.5 to 1.27 mm pitch ■ Instruction Manual ■ Insulating Cap 2.5 ■ Protection Cap 2.5 up to 2000 m up to 15000 m 0° C to +50° C -40° C to +71° C 80 % relative humidity for temperatures up to +31° C, decreasing linearly to 40 % at +50° C Order No. 855-701-00E ■ Solid Tip CuBe 0.5 mm ■ Spring Tip 0.5 mm ■ Sprung Hook 2.5 ■ 2 Footer Positioner ■...