high Temperature Exhaust Hose (HT) Hoses Plymovent’s market-leading High Temperature Exhaust Hose (HT) for Fire and EMS stations is a proprietary construction, with a hiqh-quality synthetic fabric that can endure exhaust gas temperatures of up to 900˚F (482°C) continuous in a properly designed system. Independent laboratory test results available upon request. The hose is flame and abrasion resistant. Upper, Mid and Lower hose packages available for Plymovent track and rail systems. applications The HT is intended to be used for the following applications: • Fire and emergency services stations with heavy-duty vehicles that generate high temperature hazardous exhaust fumes, such as 2007 and newer diesel vehicles that contain aftertreatment technologies such as a diesel particulate filter. Note: For safety reasons vehicle regeneration should never be performed inside the Fire or EMS Station due to the high exhaust temperatures associated with DPF regeneration. Physical dimensions and properties product data sheet • Lower Hose Diameters available Order information Article no. Number (package) • proprietary multi-layer, high temperature synthetic fabric hose • spring steel wire helix and a high temperature synthetic wear strip for abrasion resistance • constructed with a proprietary, high-temperature, semi-rigid material to ensure proper operation with Grabbers Gross weight Recommended air speed 4000 to 4500 fpm (20,3 to 20,8 m/s). AIRFLOW Ambient conditions Operating temperature Recommended lengths Upper hose standard lengths are 6 ft, 12 ft, 14.5 ft, 17 ft, and 19 ft (1,8 m, 3,7 m, 4,4 m, 5,1 m, 5,8 m) Product combinations Track/Rail Systems Balancer, hose saddle, hose clamps, nozzles (must be ordered separately) Shipping data specifications Material • Hose wall • SBTA • STRA • VSRX • Magnetic Grabber • Pneumatic Grabber Example: for a 5 in. (125 mm) HT hose with airspeed of 4000 FPM (20 m/s), the static pressure loss w.g. per 100 fe

Upper Hose (single piece) 0000116367 710040-1 0000110177 Construction: A. Internal spring steel wire helix with an external high temperature wear strip (yellow) B. High temperature synthetic outer layer provides additional abrasion protection (black) The non-locking spring recoil balancer controls the point at which the Grabber disconnects from the tailpipe. As the hose attains its maximum reach, the balancer locking cable will bottom out, in turn pulling the nozzle from the moving vehicle’s tailpipe. Plymovent Authorized Distributor: Safety Disconnect Handle Plymovent’s safety disconnect handle...