EG EXHAUST HOSE The EG hose is a high-quality fabric flexible hose recommended for use in areas that service cars and light trucks. The EG hose is vibration resistant and can withstand temperatures up to 200ºC (390ºF)*. Please note this hose is not standard available in North America. APPLICATIONS The EG is intended to be used for the following applications: Shipping data Gross weight • To eliminate hazardous vehicle exhaust emissions with our vehicle exhaust capture and removal systems for the following segments: fire and emergency service stations as well as military facilities. Harmonized Tariff Code Physical dimensions and properties Material • hose wall • clamp supporting spiral • CSM coated polyester fabric • galvanized steel * When correctly applied with exhaust gas funnels and sufficient fresh air supply (approx. 50%) ** Please make sure that your nozzle and hose temperature properties match Ambient conditions Operating temperature product data sheet Product combinations Railsystems Hose reels • Magnetic grabber • Pneumatic grabber • MEN • REN • REC • REG Options and accesories Balancer, hose saddle, hose clamps, safety disconnect handle (SDCH) Order information Article no. E.g.: given a 125 mm EG hose and an airspeed of 23 m/s, the pressure drop per meter will be 130 P

FEATURES & BENEFITS • Abrasion protection via external clamp profile • Secure clamping of the wall • Highly flexible and compressible • Vibration resistant • Good resistance to chemicals • Outer protection profile made of elasticised material clamp profile supporting spiral | galvanized steel firmly clamped, shock-absorbing, anti-abrasion profile made from elasticized, high-temperature plastic wall | CSM coated polyester fabric Product type Product category Always check the latest version o