MODULAR TRACTION SUBSTATIONS ■ CITY ELECTRIC TRANSPORT ■

MODULAR TRACTION SUBSTATIONS

MODULAR TRACTION SUBSTATION Modular traction substation produced by PLUTON is an integrated solution for reliable power supply of electric transport catenary. Modular traction substation can be used as transportable or fixed electric power distribution point. Application of modern equipment and advanced solutions in the field of electrical engineering, based on years of experience, ensures safety and reliability in equipment operation. Modular traction substation refers to 17.5 kV voltage class and is designed for operation in automatic mode being an unattended installation. Modular traction...

MAIN FEATURES Environmental compatibility Interlockings and protections guarantee equipment high operational safety for the staff. PLUTON uses materials with minimal impact on environment in its production. The materials are recycled and safe not only during operation, but also at the end of product life. Mobility and possibility of moving to a new place of operation by road and rail. minimum of construction works on installation site; high readiness for commissioning; rapid mounting (simple connection of primary and secondary circuits); possibility to configure different circuits; antiburglar...

Modular traction substation can have the following design: • single-unit - one unified module; • two-unit - two unified modules; • three-unit - three unified modules. Manufacturing of modular traction substation for a more number of units is possible on case of necessity. Modular traction substation is a functionally finished product with organization of power and secondary circuits connections. Modules are mechanically in accordance with the design solution. Reliable power supply is provided by modern traction equipment system, automatically controlled by SCADA system. Auxiliaries system provides...

Lighting system Modular traction substation is equipped with a fixed and emergency lighting system. Lighting is provided inside and outside modular traction substation. Ventilation, air conditioning, heating systems Modular traction substation is equipped with supply and exhaust ventilation, controlled by microclimate monitoring unit. Shutters for natural ventilation are installed. The shutters can be closed with electric drive. There is also a possibility of manual control. The shutters can be additionally closed with special louvers in cold season. Ventilation grids in operating position are...

TECHNICAL DETAILS OF MODULAR TRACTION SUBSTATION Manufacturing of modular traction substation with parameters different from those given above, is made upon special order.

The following equipment, maintaining power supply of city electric transport rolling stock, is provided for installation in modular traction substation: • NEX Medium voltage switchgear; • Traction and auxiliaries transformers; • Rectifier; • DC switchgear; • Negative busbar switchgear; • Auxiliaries cabinet; • Control system of modular traction substation; • Protection relays blocks; • Lighting system; • Ventilation and air conditioning systems; • Heating system; • Fire extinguishing system and intruder alarm. MODULAR TRACTION SUBSTATIONS

SINGLE-LINE DIAGRAM OF SINGLE-UNIT MODULAR TRACTION SUBSTATION NEX Medium Voltage Switchgear Input Cubicle (Input 1) Outgoing Line Cubicle (Rectifier Unit) Auxiliaries Transformer Cubicle Voltage Transformers Cubicle Input Cubicle (Input 2) Traction Transformer Auxiliaries Transformer Air-conditioning System Electric Heating System Ventilation System Negative Busbar Switchgear Negative Busbar - Un ~T= Intruder Alarm System Fire Alarm System Control System of Modular Traction Substation SMTN - traction network monitoring and protection system M- reverse current control module RPA - relay protection...

Modular traction substation is transported on platforms by road and / or rail. The module design provides facilities for usage of lifting devices. Modules indoor equipment can not be removed. Switchgear trolleys, ladders, drain, airconditioning system outdoor unit are transported separately. Modular traction substation is installed on prepared site - on the foundation (reinforced concrete blocks or other support elements). Such an installation allows fast mounting and dismantling, moving to a new operation place. This allows significantly to reduce the time and effort required for modular traction...

Ventilation grid Outdoor unit of air-conditioning system Switchgear compartment door Outdoor light Fire alarm Outdoor light Transformers compartment gates Ground level Outgoing lines -Un Reserve input ~380 V, 50 Hz 3700 MODULAR TRACTION SUBSTATIONS

2014 VINNYTSIA TRAM (Ukraine) Supply of two-unit modular traction substation: • Module - 2 units; • NEX Switchgear 10 kV - 1 set; • Rectifier - 2 units; • DC Switchgear 600 V - 8 units; • RESIBLOC Transformer - 2 units; • Auxiliaries equipment - 1 set; • SCADA system - 1 set. Installation works, commissioning, startup. PLUTOn MODULAR TRACTION SUBSTATIONS

2014 NABEREZHNYE CHELNY CITY ELECTRIC TRANSPORT (Russian Federation) Supply of three-unit modular traction substation: • Module - 3 units; • NEX Switchgear 6 kV - 1 set; • Rectifier - 3 units; • DC Switchgear 600 V - 12 units; • RESIBLOC Transformer - 3 units; • Auxiliaries equipment - 1 set; • SCADA system - 1 set. Installation works, commissioning, startup. MODULAR TRACTION SUBSTATIONS

2016 LVOV CITY ELECRTIC TRANSPORT (Ukraine) Supply of three-unit modular traction substation: • Module - 3 units; • NEX Switchgear 6 kV - 1 set; • Rectifier - 3 units; • DC Switchgear 600 V - 12 units; • RESIBLOC Transformer - 3 units; • Auxiliaries equipment - 1 set; • SCADA system - 1 set. Installation works, commissioning, startup. PLUTOn MODULAR TRACTION SUBSTATIONS

2018 KRAMATORSK CITY ELECTRIC TRANSPORT (Ukraine) Turn-key project. Supply of three-unit modular traction substation for Municipal Enterprise “Kramatorsk Tram and Trolleybus Department (Authority)” (Ukraine). • Module - 3 units; • NEX Switchgear 6 kV - 1 set; • Rectifier - 3 units; • DC Switchgear 600 V - 12 units; • Converter transformer - 3 units; • Auxiliaries equipment - 1 set; • SCADA system - 1 set. Development of the project design and estimate documentation, installation, commissioning and startup. MODULAR TRACTION SUBSTATIONS