SIlo
SIlo
- Reduction in storage space and raw material handling costs.
- Minimization of plastic material waste.
- Expertise in designing storage and pneumatic conveying systems for plastic materials in granule or powder form.
- Modular silos are constructed with aluminium and can be installed outdoors on reinforced concrete platforms.
- Manufactured according to DIN 4149 norms, ensuring structural stability and compliance with DIN1055 standards.
- Vertical-axis welding technique ensures cylinder straightness.
- Recommended silo size includes a 30% extra volume for daily consumption needs.
- Capacities range from 150 to 400m3.
- Managed via Plastic Systems Supervisor with radar sensors or load cells for material level control.
- Constructed from AlMg2 5454 aluminium, with accessories made from AlMgSi0,5 alloy 6060, and galvanized stainless steel for structural elements.
- Dimensions vary by capacity, with specific measurements provided for 150m3, 200m3, 300m3, and 400m3 silos.
- Includes features such as inlet nozzles, ventilated manholes, handrails, filling pipes, lifting eyebolts, level switches, ladders, supporting hooks, level sensors, name plates, outlet nozzles, steel supporting legs, and load cells.
Catalog excerpts
Plastic Systems can provide its expertise, know-how, service, technical advice, engineering and software knowledge for designing storage systems and pneumatic conveying systems of plastic material and additives in granule/powder form. Their aluminium modular structure represents a flexible solution for reducing transportation costs. L-shaped flanges along with stainless-steel screws and liquid gaskets ensure a safe and hermetic assembly. These modular silos can be installed outside factories and are positioned on properly-sized reinforced-concrete platforms. All of our silos are manufactured according to norms DIN 4149. The structural stability is based on loads and stresses so as to comply with standards DIN1055. All silos are welded with the so-called vertical-axis technique which ensures the straightness of the cylinder. The size of the silo depends on the daily consumption but we recommend choosing a 30%-extra volume. Storage systems TECHNICAL SPECIFICATIONS: • Silos with capacities from 150 to 400m3. • Silo management via Plastic Systems Supervisor. • Material level is controlled with radar sensors or load cells. • The silos are made of AlMg 5454 aluminium, accessories are made of AlMgSi alloy 6060, bolts and nuts are made of AISI, structure and fixing elements are made of galvanized stainless steel. ADDED VALUE: • Reduction of storage spaces. • Reduction of the costs of raw material and material handling. • Reduction of waste of plastic material. PLA SY TIC TEMS Plastic Systems S.r.l. assumes no responsibility for any errors or inaccuracies in the contents of this catalogue and reserves the right to make changes to the products without prior notice. ADVANCED PLASTIC TECHNOLOGI
Open the catalog to page 1
Storage systems PLA SY SILO series ° iw ° o Vj| Q www.plasticsystems.i Inteface for controlling silos Load cell for weighing silos TECHNICAL DATA TIC TEMS ADVANCED PLASTIC TECHNOLOGIES Plastic Systems S.r.l. assumes no responsibility for any errors or inaccuracies in the contents of this catalogue and reserves the right to make changes to the products without prior notice.
Open the catalog to page 2All Plastic Systems S.p.A. catalogs and technical brochures
- Rail conveyor
- Dynamic agitator
- Belt conveyor
- Batch agitator
- Drying system
- Feeder
- Volumetric dosing unit
- Vertical homogenizer
- Turntable
- Waste shredder
- Electric drive conveyor
- Inclined conveyor
- Pelletizer
- Electric rotary table
- Solid mixer
- Air dehumidifier
- Automatic dispensing system
- Double shaft shredding machine
- Horizontal rotary table
- Air blast dewatering system