PB1E/S PB1E/D

Product catalog summary

Overview: The document provides technical specifications for Plastiblow's extrusion blow moulding machines, specifically models PB1E/S and PB1E/D, designed for containers up to 1 litre. These machines are electrically driven and available in single and double station configurations.

Specifications:

Air and Water Requirements: Air pressure is between 6 to 8 bar with an air consumption of 700 Nl/min. Cooling water pressure is 3 bar.
Energy Consumption: Average energy consumption is 5 to 8 kWh.
Extrusion Heads: The machines support various configurations with container volumes ranging from 0.25 to 1 litre and die diameters from 20 to 33 mm.
Heating Zones: The number of heating zones varies from 3 to 8 depending on the model.

Extruder Details:

Screw Diameter and Length: Options include 25 mm and 50 mm screw diameters with lengths corresponding to L/D ratios of 25.
Motor and Heating Power: Motor power ranges from 6.9 kW to 9.6 kW, with heating power up to 30 kW.
Plasticizing Capacity: HDPE plasticizing capacity is up to 70 kg/h, while PVC is up to 53 kg/h.

Machine Dimensions and Weight:

Single Station: Dimensions are 3800 mm x 3260 mm x 2350 mm with a weight of 3,650 kg for the E50/25 model.
Double Station: Dimensions are 3900 mm x 3260 mm x 2300 mm with a weight of 5,760 kg for the E60/25 model.

Operational Parameters:

Mould Clamping Force: Ranges from 260 kN to 330 kN.
Dry Cycle Time: Approximately 1 to 1.5 seconds.

Contact Information: Plastiblow SRL, Via Salvemini 20, 20094 Corsico (MI), Italy. Phone: +39 02 44.05.476, Email: [email protected]

Catalog excerpts

plastiblow PB1E marzo 2013 stampa MACCHINE ESTRUSIONE SOFFIAGGIO FINO A 1 LITRO EXTRUSION BLOW MOULDING MACHINES UP TO 1 LITRE MAQUINAS DE EXTRUSION SOPLADO HASTA 1 LITRO MACHINES D’EXTRUSION SOUFFLAGE JUSQU'A 1 LITRE AZIONAMENTO ELETTRICO ELECTRIC DRIVEN ACCIONAMIENTO ELECTRICO ACTIONNEMENT ELECTRIQUE

Open the catalog to page 1

plastiblow PB1E marzo 2013 stampa Dati generali / General data / Datos generales / Données générales générales Stampi / Moulds / Moldes / Moules Corsa / Stroke / Carrera / Course Forza di chiusura / Mould clamping force / Fuerza de cierre / Force de fermeture Ciclo a vuoto / Dry cicle time / Ciclo en vacío / Cadence à vide Consumi / Consumptions / Consumos / Consommations 6÷8 Pressione aria / Air pressure / Presión aire / Pression air bar Consumo aria / Air consumption / Consumo aire / Consommation air Nl/min Pressione acqua / Cooling water pressure / Presión agua / Pression eau bar Raffreddamento...

Open the catalog to page 2

PB1E/S PB1E/D

PB1E/S PB1E/D

Catalog excerpts

All Plastiblow catalogs and technical brochures